100 Ellinwood Drive, Pleasant Hill, Ca 94523

How does 100 Ellinwood Drive, Pleasant Hill, Ca 94523 compare with other multifamily housing buildings in California?

The latest disclosures cover 10,630 multifamily housing buildings in California, out of 40,029 buildings citywide. 100 Ellinwood Drive, Pleasant Hill, Ca 94523's ENERGY STAR score of 100 compares with an average of 82 across the 9,612 that report a score; it scores higher than 76% of them. Its site EUI of 19.2 kBtu/ft² is about 44% below the average of 34.4 kBtu/ft² — it uses less energy per square foot than the typical building in that group. Its emissions intensity of 1.1 kgCO₂e/ft² is about half of the group average of 2.1 kgCO₂e/ft².

At 85,680 sq ft, it is about 43% below the average floor area of 150,919 sq ft for those buildings. It was built in 1978, 10 years earlier than the group's average year built (1988). Across all 24 jurisdictions BuildingCensus covers, the 59,945 multifamily housing buildings average an ENERGY STAR score of 70 and a site EUI of 59.0 kBtu/ft².

How has 100 Ellinwood Drive, Pleasant Hill, Ca 94523's energy performance changed over time?

BuildingCensus holds 4 California disclosures for 100 Ellinwood Drive, Pleasant Hill, Ca 94523, covering report years 2021–2024. Its ENERGY STAR score was 100 in both 2021 and 2024. Site EUI moved from 25.3 kBtu/ft² (2021) to 19.2 kBtu/ft² (2024), a 24% decrease. Reported emissions went from 113 tCO₂e to 96 tCO₂e over the same span (down 15%).

What does an ENERGY STAR score of 100 mean?

ENERGY STAR scores run from 1 to 100 and are computed by the EPA's Portfolio Manager as a percentile against similar buildings nationwide, adjusted for climate, size and use: 100 is the top of the scale. BuildingCensus bands the score into report-card grades; 100 falls in band A — high performer (85–100). Scores of 75 or higher meet the threshold for ENERGY STAR certification; certification itself is a separate, verified application that the disclosure does not record. In California, 65% of scored buildings are at 75 or above.

Site energy-use intensity (EUI) is the energy a building uses on site in a year divided by its floor area, in thousand Btu per square foot — lower is more efficient. 100 Ellinwood Drive, Pleasant Hill, Ca 94523's 19.2 kBtu/ft² across 85,680 sq ft works out to about 1.6 billion Btu (482 MWh-equivalent) in 2024. The disclosure also reports 170,332 kWh of electricity and 10,796 therms of natural gas for the year.

Which law requires 100 Ellinwood Drive, Pleasant Hill, Ca 94523 to report its energy use?

100 Ellinwood Drive, Pleasant Hill, Ca 94523 reports under AB 802 (Public Resources Code §25402.10), the legal basis of California's Building Energy Benchmarking Program (statewide), which publishes each covered building's annual benchmarking results. The record shown here is the report-year 2024 disclosure (source record california:23751018:2024). AB 802 requires every California commercial building over 50,000 sq ft to report energy use to the CEC annually; the CEC publicly discloses the results statewide.