BuildingCensus
D

The Dylan - Remm

Multifamily Housing in California, CA · 550 Los Arbolitos Blvd, Oceanside · 92058

At a glance

The Dylan - Remm is a 197,639-square-foot multifamily housing building at 550 Los Arbolitos Blvd, Oceanside in Oceanside, California, built in 1973. In its 2020 California benchmarking disclosure it reported an ENERGY STAR score of 48 out of 100 (grade D), a site energy-use intensity of 56.1 kBtu/ft² and 638 tCO₂e of greenhouse-gas emissions. That score is higher than 9% of the 9,612 scored multifamily housing buildings in California.

ENERGY STAR score
48
band D · 2020
Site EUI
56.1
kBtu/ft²
GHG emissions
638
tCO₂e
GHG intensity
3.2
kgCO₂e/ft²
Floor area
197,639
sq ft
Year built
1973
vintage
◆ Loading map…
85–10070–8455–691–54
This entry + 5 nearby

AB 802 (Public Resources Code §25402.10) · reporting year 2020

Benchmarking record

FieldValue
ENERGY STAR score48 (band D)
Site EUI56.1 kBtu/ft²
Source EUI—
GHG emissions638 tCO₂e
GHG intensity3.2 kgCO₂e/ft²
Electricity1,332,207 kWh
Natural gas63,441 therms
Gross floor area197,639 sq ft
Source recordcalifornia:12742744:2020

The disclosure history

Year over year

YearScoreΔSite EUIGHG emissions
2020latest48-3356.1 kBtu/ft²638 tCO₂e
20198148.3 kBtu/ft²548 tCO₂e

Compliance context

AB 802 (Public Resources Code §25402.10)

AB 802 requires every California commercial building over 50,000 sq ft to report energy use to the CEC annually; the CEC publicly discloses the results statewide.

Program details →

Ownership

No owning organisation shown. Names of private individuals in the disclosure are not published here.

Own or manage this building? Claim it to correct the record and get compliance alerts.

Location

Address
550 Los Arbolitos Blvd, Oceanside
State
California
ZIP
92058
Coordinates
33.23009, -117.33688

Within ~1 km

Nearby benchmarked buildings

See also: most efficient in California · biggest emitters

How does The Dylan - Remm compare with other multifamily housing buildings in California?

The latest disclosures cover 10,630 multifamily housing buildings in California, out of 40,029 buildings citywide. The Dylan - Remm's ENERGY STAR score of 48 compares with an average of 82 across the 9,612 that report a score; it scores higher than 9% of them and lower than 91%. Its site EUI of 56.1 kBtu/ft² is about 63% above the average of 34.4 kBtu/ft² — it uses more energy per square foot than the typical building in that group. Its emissions intensity of 3.2 kgCO₂e/ft² is about 52% above the group average of 2.1 kgCO₂e/ft².

At 197,639 sq ft, it is about 31% above the average floor area of 150,919 sq ft for those buildings. It was built in 1973, 15 years earlier than the group's average year built (1988). Across all 24 jurisdictions BuildingCensus covers, the 59,945 multifamily housing buildings average an ENERGY STAR score of 70 and a site EUI of 59.0 kBtu/ft².

How has The Dylan - Remm's energy performance changed over time?

BuildingCensus holds 2 California disclosures for The Dylan - Remm, covering report years 2019–2020. Its ENERGY STAR score went from 81 in 2019 to 48 in 2020 (-33 points); its best year on file was 2019, at 81. Site EUI moved from 48.3 kBtu/ft² (2019) to 56.1 kBtu/ft² (2020), an 16% increase. Reported emissions went from 548 tCO₂e to 638 tCO₂e over the same span (up 17%).

What does an ENERGY STAR score of 48 mean?

ENERGY STAR scores run from 1 to 100 and are computed by the EPA's Portfolio Manager as a percentile against similar buildings nationwide, adjusted for climate, size and use: a score of 48 means the building performs better than about 48% of its national peers. BuildingCensus bands the score into report-card grades; 48 falls in band D — lowest band (1–54). It sits 27 points below 75, the threshold for ENERGY STAR certification. In California, 65% of scored buildings are at 75 or above.

Site energy-use intensity (EUI) is the energy a building uses on site in a year divided by its floor area, in thousand Btu per square foot — lower is more efficient. The Dylan - Remm's 56.1 kBtu/ft² across 197,639 sq ft works out to about 11.1 billion Btu (3,249 MWh-equivalent) in 2020. The disclosure also reports 1,332,207 kWh of electricity and 63,441 therms of natural gas for the year.

Which law requires The Dylan - Remm to report its energy use?

The Dylan - Remm reports under AB 802 (Public Resources Code §25402.10), the legal basis of California's Building Energy Benchmarking Program (statewide), which publishes each covered building's annual benchmarking results. The record shown here is the report-year 2020 disclosure (source record california:12742744:2020). AB 802 requires every California commercial building over 50,000 sq ft to report energy use to the CEC annually; the CEC publicly discloses the results statewide.

More multifamily housing buildings in California

Frequently asked questions

What is The Dylan - Remm's energy grade?

The Dylan - Remm scores 48 out of 100 on ENERGY STAR — band D, lowest band (1–54) — in its 2020 California disclosure. Scores are national percentiles against similar buildings; 75+ qualifies for ENERGY STAR certification.

How much energy does The Dylan - Remm use?

Its 2020 site energy-use intensity was 56.1 kBtu/ft² across 197,639 sq ft, including 1,332,207 kWh of electricity and 63,441 therms of natural gas.

What are The Dylan - Remm's carbon emissions?

The Dylan - Remm reported 638 tCO₂e of greenhouse-gas emissions (3.2 kgCO₂e/ft²) for 2020.

Where is The Dylan - Remm?

The Dylan - Remm is at 550 Los Arbolitos Blvd, Oceanside, in Oceanside, California 92058. Its coordinates are 33.23009, -117.33688 (latitude, longitude), as published in the Building Energy Benchmarking Program (statewide) file.

How big is The Dylan - Remm and when was it built?

The Dylan - Remm has 197,639 sq ft of gross floor area, as reported in its 2020 disclosure. The disclosure lists 1973 as its year built. It is classed as multifamily housing.

Is The Dylan - Remm covered by AB 802 (Public Resources Code §25402.10)?

Yes — it appears in the 2020 Building Energy Benchmarking Program (statewide) disclosure, which lists the buildings reporting under AB 802 (Public Resources Code §25402.10).

Working with California building benchmarking records? Pro adds alerts, change history and CSV export ($49/mo); Enterprise adds full national files, the API and an MCP server for AI tools.

About this data

Source: Building Energy Benchmarking Program (statewide) (AB 802 (Public Resources Code §25402.10)), as published July 9, 2026. See the methodology for how records are matched, cleaned and scored.

Cite as: BuildingCensus, “The Dylan - Remm, Oceanside, California — 2020 benchmarking disclosure”, https://buildingcensus.com/buildings/california/the-dylan-remm-32ecbd79 (data as of July 9, 2026).