BuildingCensus
B

1725 BUTLER AVE

Multifamily Housing in Los Angeles, CA · 90025

At a glance

1725 BUTLER AVE is a 30,289-square-foot multifamily housing building in Los Angeles, California, built in 1980. In its 2025 Los Angeles benchmarking disclosure it reported an ENERGY STAR score of 79 out of 100 (grade B), a site energy-use intensity of 28.4 kBtu/ft² and 47 tCO₂e of greenhouse-gas emissions. That score is higher than 40% of the 3,344 scored multifamily housing buildings in Los Angeles.

ENERGY STAR score
79
band B · 2025
Site EUI
28.4
kBtu/ft²
GHG emissions
47
tCO₂e
GHG intensity
—
kgCO₂e/ft²
Floor area
30,289
sq ft
Year built
1980
vintage

LA Municipal Code Div. 97, §91.9701 (EBEWE) · reporting year 2025

Benchmarking record

FieldValue
ENERGY STAR score79 (band B)
Site EUI28.4 kBtu/ft²
Source EUI56.1 kBtu/ft²
GHG emissions47 tCO₂e
GHG intensity—
Water use926 kgal
Gross floor area30,289 sq ft
Source recordla:425336838293:2025

The disclosure history

Year over year

YearScoreΔSite EUIGHG emissions
2025latest79-728.4 kBtu/ft²47 tCO₂e
202486-627.2 kBtu/ft²45 tCO₂e
202392+227.3 kBtu/ft²52 tCO₂e
20229027.7 kBtu/ft²52 tCO₂e
2021—13.7 kBtu/ft²23 tCO₂e
2020—14.7 kBtu/ft²25 tCO₂e
2019—3.9 kBtu/ft²7 tCO₂e
2018—3.9 kBtu/ft²8 tCO₂e

Compliance context

LA Municipal Code Div. 97, §91.9701 (EBEWE)

EBEWE requires annual benchmarking plus audits/retro-commissioning every five years for privately owned buildings of 20,000 sq ft or more; non-compliance carries a $202 fee (LAMC §91.9712) plus possible late fees.

Program details →

Ownership

Vert Energy Group, Inc.

Own or manage this building? Claim it to correct the record and get compliance alerts.

Location

Address
1725 BUTLER AVE
State
California
ZIP
90025

Within ~1 km

Nearby benchmarked buildings

This source publishes no coordinates, so nearby buildings can't be resolved yet.

See also: most efficient in Los Angeles · biggest emitters

How does 1725 BUTLER AVE compare with other multifamily housing buildings in Los Angeles?

The latest disclosures cover 3,538 multifamily housing buildings in Los Angeles, out of 11,498 buildings citywide. 1725 BUTLER AVE's ENERGY STAR score of 79 compares with an average of 78 across the 3,344 that report a score; it scores higher than 40% of them and lower than 59%. Its site EUI of 28.4 kBtu/ft² is about 24% below the average of 37.2 kBtu/ft² — it uses less energy per square foot than the typical building in that group.

At 30,289 sq ft, it is about half of the average floor area of 60,540 sq ft for those buildings. It was built in 1980, 5 years later than the group's average year built (1975). Across all 24 jurisdictions BuildingCensus covers, the 59,945 multifamily housing buildings average an ENERGY STAR score of 70 and a site EUI of 59.0 kBtu/ft².

How has 1725 BUTLER AVE's energy performance changed over time?

BuildingCensus holds 8 Los Angeles disclosures for 1725 BUTLER AVE, covering report years 2018–2025. Its ENERGY STAR score went from 90 in 2022 to 79 in 2025 (-11 points); its best year on file was 2023, at 92. Site EUI moved from 3.9 kBtu/ft² (2018) to 28.4 kBtu/ft² (2025), an 628% increase. Reported emissions went from 8 tCO₂e to 47 tCO₂e over the same span (up 508%).

What does an ENERGY STAR score of 79 mean?

ENERGY STAR scores run from 1 to 100 and are computed by the EPA's Portfolio Manager as a percentile against similar buildings nationwide, adjusted for climate, size and use: a score of 79 means the building performs better than about 79% of its national peers. BuildingCensus bands the score into report-card grades; 79 falls in band B — above median (70–84). Scores of 75 or higher meet the threshold for ENERGY STAR certification; certification itself is a separate, verified application that the disclosure does not record. In Los Angeles, 63% of scored buildings are at 75 or above.

Site energy-use intensity (EUI) is the energy a building uses on site in a year divided by its floor area, in thousand Btu per square foot — lower is more efficient. 1725 BUTLER AVE's 28.4 kBtu/ft² across 30,289 sq ft works out to about 0.9 billion Btu (252 MWh-equivalent) in 2025. Its source EUI of 56.1 kBtu/ft² also counts the energy lost generating and delivering that power, which is why it is higher. The disclosure also reports 926 thousand gallons of water for the year.

Which law requires 1725 BUTLER AVE to report its energy use?

1725 BUTLER AVE reports under LA Municipal Code Div. 97, §91.9701 (EBEWE), the legal basis of Los Angeles's Existing Buildings Energy & Water Efficiency (EBEWE) program, which publishes each covered building's annual benchmarking results. The record shown here is the report-year 2025 disclosure (source record la:425336838293:2025). EBEWE requires annual benchmarking plus audits/retro-commissioning every five years for privately owned buildings of 20,000 sq ft or more; non-compliance carries a $202 fee (LAMC §91.9712) plus possible late fees.

More multifamily housing buildings in Los Angeles

Frequently asked questions

What is 1725 BUTLER AVE's energy grade?

1725 BUTLER AVE scores 79 out of 100 on ENERGY STAR — band B, above median (70–84) — in its 2025 Los Angeles disclosure. Scores are national percentiles against similar buildings; 75+ qualifies for ENERGY STAR certification.

How much energy does 1725 BUTLER AVE use?

Its 2025 site energy-use intensity was 28.4 kBtu/ft² (56.1 kBtu/ft² source) across 30,289 sq ft.

What are 1725 BUTLER AVE's carbon emissions?

1725 BUTLER AVE reported 47 tCO₂e of greenhouse-gas emissions for 2025.

Where is 1725 BUTLER AVE?

1725 BUTLER AVE is in Los Angeles, California 90025.

How big is 1725 BUTLER AVE and when was it built?

1725 BUTLER AVE has 30,289 sq ft of gross floor area, as reported in its 2025 disclosure. The disclosure lists 1980 as its year built. It is classed as multifamily housing.

Is 1725 BUTLER AVE covered by LA Municipal Code Div. 97, §91.9701 (EBEWE)?

Yes — it appears in the 2025 Existing Buildings Energy & Water Efficiency (EBEWE) disclosure, which lists the buildings reporting under LA Municipal Code Div. 97, §91.9701 (EBEWE).

Working with Los Angeles building benchmarking records? Pro adds alerts, change history and CSV export ($49/mo); Enterprise adds full national files, the API and an MCP server for AI tools.

About this data

Source: Existing Buildings Energy & Water Efficiency (EBEWE) (LA Municipal Code Div. 97, §91.9701 (EBEWE)), as published October 2, 2026. See the methodology for how records are matched, cleaned and scored.

Cite as: BuildingCensus, “1725 BUTLER AVE, Los Angeles, California — 2025 benchmarking disclosure”, https://buildingcensus.com/buildings/los-angeles/1725-butler-ave-89baa009 (data as of October 2, 2026).