BuildingCensus
B

7010 SEPULVEDA BLVD

Multifamily Housing in Los Angeles, CA · 91405

At a glance

7010 SEPULVEDA BLVD is a 61,374-square-foot multifamily housing building in Los Angeles, California, built in 1964. In its 2025 Los Angeles benchmarking disclosure it reported an ENERGY STAR score of 72 out of 100 (grade B), a site energy-use intensity of 48.6 kBtu/ft² and 164 tCO₂e of greenhouse-gas emissions. That score is higher than 30% of the 3,344 scored multifamily housing buildings in Los Angeles.

ENERGY STAR score
72
band B · 2025
Site EUI
48.6
kBtu/ft²
GHG emissions
164
tCO₂e
GHG intensity
—
kgCO₂e/ft²
Floor area
61,374
sq ft
Year built
1964
vintage

LA Municipal Code Div. 97, §91.9701 (EBEWE) · reporting year 2025

Benchmarking record

FieldValue
ENERGY STAR score72 (band B)
Site EUI48.6 kBtu/ft²
Source EUI93.0 kBtu/ft²
GHG emissions164 tCO₂e
GHG intensity—
Water use4,580 kgal
Gross floor area61,374 sq ft
Source recordla:420801894620:2025

The disclosure history

Year over year

YearScoreΔSite EUIGHG emissions
2025latest72-448.6 kBtu/ft²164 tCO₂e
202476+451.3 kBtu/ft²186 tCO₂e
202372+652.4 kBtu/ft²196 tCO₂e
202266+1355.4 kBtu/ft²206 tCO₂e
202153+961.4 kBtu/ft²212 tCO₂e
202044+463.7 kBtu/ft²222 tCO₂e
20194065.0 kBtu/ft²225 tCO₂e
2018———
2017———

Compliance context

LA Municipal Code Div. 97, §91.9701 (EBEWE)

EBEWE requires annual benchmarking plus audits/retro-commissioning every five years for privately owned buildings of 20,000 sq ft or more; non-compliance carries a $202 fee (LAMC §91.9712) plus possible late fees.

Program details →

Ownership

Conservice, LLC

Own or manage this building? Claim it to correct the record and get compliance alerts.

Location

Address
7010 SEPULVEDA BLVD
State
California
ZIP
91405

Within ~1 km

Nearby benchmarked buildings

This source publishes no coordinates, so nearby buildings can't be resolved yet.

See also: most efficient in Los Angeles · biggest emitters

How does 7010 SEPULVEDA BLVD compare with other multifamily housing buildings in Los Angeles?

The latest disclosures cover 3,538 multifamily housing buildings in Los Angeles, out of 11,498 buildings citywide. 7010 SEPULVEDA BLVD's ENERGY STAR score of 72 compares with an average of 78 across the 3,344 that report a score; it scores higher than 30% of them and lower than 69%. Its site EUI of 48.6 kBtu/ft² is about 31% above the average of 37.2 kBtu/ft² — it uses more energy per square foot than the typical building in that group.

At 61,374 sq ft, it is roughly in line with the average floor area of 60,540 sq ft for those buildings. It was built in 1964, 11 years earlier than the group's average year built (1975). Across all 24 jurisdictions BuildingCensus covers, the 59,945 multifamily housing buildings average an ENERGY STAR score of 70 and a site EUI of 59.0 kBtu/ft².

How has 7010 SEPULVEDA BLVD's energy performance changed over time?

BuildingCensus holds 9 Los Angeles disclosures for 7010 SEPULVEDA BLVD, covering report years 2017–2025. Its ENERGY STAR score went from 40 in 2019 to 72 in 2025 (+32 points); its best year on file was 2024, at 76. Site EUI moved from 65.0 kBtu/ft² (2019) to 48.6 kBtu/ft² (2025), a 25% decrease. Reported emissions went from 225 tCO₂e to 164 tCO₂e over the same span (down 27%).

What does an ENERGY STAR score of 72 mean?

ENERGY STAR scores run from 1 to 100 and are computed by the EPA's Portfolio Manager as a percentile against similar buildings nationwide, adjusted for climate, size and use: a score of 72 means the building performs better than about 72% of its national peers. BuildingCensus bands the score into report-card grades; 72 falls in band B — above median (70–84). It sits 3 points below 75, the threshold for ENERGY STAR certification. In Los Angeles, 63% of scored buildings are at 75 or above.

Site energy-use intensity (EUI) is the energy a building uses on site in a year divided by its floor area, in thousand Btu per square foot — lower is more efficient. 7010 SEPULVEDA BLVD's 48.6 kBtu/ft² across 61,374 sq ft works out to about 3 billion Btu (874 MWh-equivalent) in 2025. Its source EUI of 93.0 kBtu/ft² also counts the energy lost generating and delivering that power, which is why it is higher. The disclosure also reports 4,580 thousand gallons of water for the year.

Which law requires 7010 SEPULVEDA BLVD to report its energy use?

7010 SEPULVEDA BLVD reports under LA Municipal Code Div. 97, §91.9701 (EBEWE), the legal basis of Los Angeles's Existing Buildings Energy & Water Efficiency (EBEWE) program, which publishes each covered building's annual benchmarking results. The record shown here is the report-year 2025 disclosure (source record la:420801894620:2025). EBEWE requires annual benchmarking plus audits/retro-commissioning every five years for privately owned buildings of 20,000 sq ft or more; non-compliance carries a $202 fee (LAMC §91.9712) plus possible late fees.

More multifamily housing buildings in Los Angeles

Frequently asked questions

What is 7010 SEPULVEDA BLVD's energy grade?

7010 SEPULVEDA BLVD scores 72 out of 100 on ENERGY STAR — band B, above median (70–84) — in its 2025 Los Angeles disclosure. Scores are national percentiles against similar buildings; 75+ qualifies for ENERGY STAR certification.

How much energy does 7010 SEPULVEDA BLVD use?

Its 2025 site energy-use intensity was 48.6 kBtu/ft² (93.0 kBtu/ft² source) across 61,374 sq ft.

What are 7010 SEPULVEDA BLVD's carbon emissions?

7010 SEPULVEDA BLVD reported 164 tCO₂e of greenhouse-gas emissions for 2025.

Where is 7010 SEPULVEDA BLVD?

7010 SEPULVEDA BLVD is in Los Angeles, California 91405.

How big is 7010 SEPULVEDA BLVD and when was it built?

7010 SEPULVEDA BLVD has 61,374 sq ft of gross floor area, as reported in its 2025 disclosure. The disclosure lists 1964 as its year built. It is classed as multifamily housing.

Is 7010 SEPULVEDA BLVD covered by LA Municipal Code Div. 97, §91.9701 (EBEWE)?

Yes — it appears in the 2025 Existing Buildings Energy & Water Efficiency (EBEWE) disclosure, which lists the buildings reporting under LA Municipal Code Div. 97, §91.9701 (EBEWE).

Working with Los Angeles building benchmarking records? Pro adds alerts, change history and CSV export ($49/mo); Enterprise adds full national files, the API and an MCP server for AI tools.

About this data

Source: Existing Buildings Energy & Water Efficiency (EBEWE) (LA Municipal Code Div. 97, §91.9701 (EBEWE)), as published October 2, 2026. See the methodology for how records are matched, cleaned and scored.

Cite as: BuildingCensus, “7010 SEPULVEDA BLVD, Los Angeles, California — 2025 benchmarking disclosure”, https://buildingcensus.com/buildings/los-angeles/7010-sepulveda-blvd-18c0170e (data as of October 2, 2026).