BuildingCensus
–

1500 Rockville Pike

Strip Mall in Montgomery County, MD · 20852

At a glance

1500 Rockville Pike is a 69,363-square-foot strip mall building in Montgomery County, Maryland, built in 1954. In its 2024 Montgomery County benchmarking disclosure it reported a site energy-use intensity of 28.2 kBtu/ft² and 151 tCO₂e of greenhouse-gas emissions.

ENERGY STAR score
—
not reported · 2024
Site EUI
28.2
kBtu/ft²
GHG emissions
151
tCO₂e
GHG intensity
—
kgCO₂e/ft²
Floor area
69,363
sq ft
Year built
1954
vintage

Benchmarking Law (Bill 2-14) / BEPS (Bill 16-21) · reporting year 2024

Benchmarking record

FieldValue
ENERGY STAR score—
Site EUI28.2 kBtu/ft²
Source EUI63.9 kBtu/ft²
GHG emissions151 tCO₂e
GHG intensity—
Electricity399,060 kWh
Natural gas5,927 therms
Gross floor area69,363 sq ft
Source recordmontgomery_county:6160089:2024

The disclosure history

Year over year

YearScoreΔSite EUIGHG emissions
2024latest—28.2 kBtu/ft²151 tCO₂e
2023—28.2 kBtu/ft²150 tCO₂e

Compliance context

Benchmarking Law (Bill 2-14) / BEPS (Bill 16-21)

Montgomery County's BEPS (Bill 16-21; regulations approved in 2025) sets declining site-EUI standards for buildings of 25,000+ sq ft, with interim and then final standards later this decade and into the 2030s depending on building type.

Program details →

Ownership

No owning organisation shown. Names of private individuals in the disclosure are not published here.

Own or manage this building? Claim it to correct the record and get compliance alerts.

Location

Address
1500 Rockville Pike
State
Maryland
ZIP
20852

Within ~1 km

Nearby benchmarked buildings

This source publishes no coordinates, so nearby buildings can't be resolved yet.

See also: most efficient in Montgomery County · biggest emitters

How does 1500 Rockville Pike compare with other strip mall buildings in Montgomery County?

The latest disclosures cover 33 strip mall buildings in Montgomery County, out of 1,766 buildings citywide. Its site EUI of 28.2 kBtu/ft² is about 68% below the average of 87.5 kBtu/ft² — it uses less energy per square foot than the typical building in that group.

At 69,363 sq ft, it is about 39% below the average floor area of 113,735 sq ft for those buildings. It was built in 1954, 28 years earlier than the group's average year built (1983). Across all 24 jurisdictions BuildingCensus covers, the 1,607 strip mall buildings average an ENERGY STAR score of 68 and a site EUI of 83.1 kBtu/ft².

How has 1500 Rockville Pike's energy performance changed over time?

BuildingCensus holds 2 Montgomery County disclosures for 1500 Rockville Pike, covering report years 2023–2024. Site EUI moved from 28.2 kBtu/ft² (2023) to 28.2 kBtu/ft² (2024), an 0% increase. Reported emissions went from 150 tCO₂e to 151 tCO₂e over the same span (up 1%).

What does a site EUI of 28.2 kBtu/ft² mean?

Site energy-use intensity (EUI) is the energy a building uses on site in a year divided by its floor area, in thousand Btu per square foot — lower is more efficient. 1500 Rockville Pike's 28.2 kBtu/ft² across 69,363 sq ft works out to about 2 billion Btu (573 MWh-equivalent) in 2024. Its source EUI of 63.9 kBtu/ft² also counts the energy lost generating and delivering that power, which is why it is higher. The disclosure also reports 399,060 kWh of electricity and 5,927 therms of natural gas for the year.

Which law requires 1500 Rockville Pike to report its energy use?

1500 Rockville Pike reports under the Benchmarking Law (Bill 2-14) / BEPS (Bill 16-21), the legal basis of Montgomery County's Commercial Building Energy Benchmarking program, which publishes each covered building's annual benchmarking results. The record shown here is the report-year 2024 disclosure (source record montgomery_county:6160089:2024). Montgomery County's BEPS (Bill 16-21; regulations approved in 2025) sets declining site-EUI standards for buildings of 25,000+ sq ft, with interim and then final standards later this decade and into the 2030s depending on building type.

More strip mall buildings in Montgomery County

Frequently asked questions

What is 1500 Rockville Pike's energy grade?

1500 Rockville Pike did not report an ENERGY STAR score in its 2024 disclosure, but its site energy-use intensity was 28.2 kBtu/ft².

How much energy does 1500 Rockville Pike use?

Its 2024 site energy-use intensity was 28.2 kBtu/ft² (63.9 kBtu/ft² source) across 69,363 sq ft, including 399,060 kWh of electricity and 5,927 therms of natural gas.

What are 1500 Rockville Pike's carbon emissions?

1500 Rockville Pike reported 151 tCO₂e of greenhouse-gas emissions for 2024.

Where is 1500 Rockville Pike?

1500 Rockville Pike is in Montgomery County, Maryland 20852.

How big is 1500 Rockville Pike and when was it built?

1500 Rockville Pike has 69,363 sq ft of gross floor area, as reported in its 2024 disclosure. The disclosure lists 1954 as its year built. It is classed as strip mall.

Is 1500 Rockville Pike covered by the Benchmarking Law (Bill 2-14) / BEPS (Bill 16-21)?

Yes — it appears in the 2024 Commercial Building Energy Benchmarking disclosure, which lists the buildings reporting under the Benchmarking Law (Bill 2-14) / BEPS (Bill 16-21).

Working with Montgomery County building benchmarking records? Pro adds alerts, change history and CSV export ($49/mo); Enterprise adds full national files, the API and an MCP server for AI tools.

About this data

Source: Commercial Building Energy Benchmarking (Benchmarking Law (Bill 2-14) / BEPS (Bill 16-21)), as published October 2, 2026. See the methodology for how records are matched, cleaned and scored.

Cite as: BuildingCensus, “1500 Rockville Pike, Montgomery County, Maryland — 2024 benchmarking disclosure”, https://buildingcensus.com/buildings/montgomery-county/1500-rockville-pike-c91089a8 (data as of October 2, 2026).