BuildingCensus
–

9920 Belward Campus Drive

Laboratory in Montgomery County, MD · 9920 Belward Campus Dr · 20879

At a glance

9920 Belward Campus Drive is a 51,181-square-foot laboratory building in Montgomery County, Maryland, built in 2012. In its 2024 Montgomery County benchmarking disclosure it reported a site energy-use intensity of 165.8 kBtu/ft² and 616 tCO₂e of greenhouse-gas emissions.

ENERGY STAR score
—
not reported · 2024
Site EUI
165.8
kBtu/ft²
GHG emissions
616
tCO₂e
GHG intensity
—
kgCO₂e/ft²
Floor area
51,181
sq ft
Year built
2012
vintage

Benchmarking Law (Bill 2-14) / BEPS (Bill 16-21) · reporting year 2024

Benchmarking record

FieldValue
ENERGY STAR score—
Site EUI165.8 kBtu/ft²
Source EUI336.8 kBtu/ft²
GHG emissions616 tCO₂e
GHG intensity—
Electricity1,394,369 kWh
Natural gas37,277 therms
Gross floor area51,181 sq ft
Source recordmontgomery_county:3623364:2024

The disclosure history

Year over year

YearScoreΔSite EUIGHG emissions
2024latest—165.8 kBtu/ft²616 tCO₂e
2023—307.7 kBtu/ft²1,135 tCO₂e

Compliance context

Benchmarking Law (Bill 2-14) / BEPS (Bill 16-21)

Montgomery County's BEPS (Bill 16-21; regulations approved in 2025) sets declining site-EUI standards for buildings of 25,000+ sq ft, with interim and then final standards later this decade and into the 2030s depending on building type.

Program details →

Ownership

No owning organisation shown. Names of private individuals in the disclosure are not published here.

Own or manage this building? Claim it to correct the record and get compliance alerts.

Location

Address
9920 Belward Campus Dr
State
Maryland
ZIP
20879

Within ~1 km

Nearby benchmarked buildings

This source publishes no coordinates, so nearby buildings can't be resolved yet.

See also: most efficient in Montgomery County · biggest emitters

How does 9920 Belward Campus Drive compare with other laboratory buildings in Montgomery County?

The latest disclosures cover 32 laboratory buildings in Montgomery County, out of 1,766 buildings citywide. Its site EUI of 165.8 kBtu/ft² is about 41% below the average of 280.7 kBtu/ft² — it uses less energy per square foot than the typical building in that group.

At 51,181 sq ft, it is about 27% below the average floor area of 70,572 sq ft for those buildings. It was built in 2012, 20 years later than the group's average year built (1992). Across all 24 jurisdictions BuildingCensus covers, the 795 laboratory buildings average an ENERGY STAR score of 29 and a site EUI of 231.7 kBtu/ft².

How has 9920 Belward Campus Drive's energy performance changed over time?

BuildingCensus holds 2 Montgomery County disclosures for 9920 Belward Campus Drive, covering report years 2023–2024. Site EUI moved from 307.7 kBtu/ft² (2023) to 165.8 kBtu/ft² (2024), a 46% decrease. Reported emissions went from 1,135 tCO₂e to 616 tCO₂e over the same span (down 46%).

What does a site EUI of 165.8 kBtu/ft² mean?

Site energy-use intensity (EUI) is the energy a building uses on site in a year divided by its floor area, in thousand Btu per square foot — lower is more efficient. 9920 Belward Campus Drive's 165.8 kBtu/ft² across 51,181 sq ft works out to about 8.5 billion Btu (2,487 MWh-equivalent) in 2024. Its source EUI of 336.8 kBtu/ft² also counts the energy lost generating and delivering that power, which is why it is higher. The disclosure also reports 1,394,369 kWh of electricity and 37,277 therms of natural gas for the year.

Which law requires 9920 Belward Campus Drive to report its energy use?

9920 Belward Campus Drive reports under the Benchmarking Law (Bill 2-14) / BEPS (Bill 16-21), the legal basis of Montgomery County's Commercial Building Energy Benchmarking program, which publishes each covered building's annual benchmarking results. The record shown here is the report-year 2024 disclosure (source record montgomery_county:3623364:2024). Montgomery County's BEPS (Bill 16-21; regulations approved in 2025) sets declining site-EUI standards for buildings of 25,000+ sq ft, with interim and then final standards later this decade and into the 2030s depending on building type.

More laboratory buildings in Montgomery County

Frequently asked questions

What is 9920 Belward Campus Drive's energy grade?

9920 Belward Campus Drive did not report an ENERGY STAR score in its 2024 disclosure, but its site energy-use intensity was 165.8 kBtu/ft².

How much energy does 9920 Belward Campus Drive use?

Its 2024 site energy-use intensity was 165.8 kBtu/ft² (336.8 kBtu/ft² source) across 51,181 sq ft, including 1,394,369 kWh of electricity and 37,277 therms of natural gas.

What are 9920 Belward Campus Drive's carbon emissions?

9920 Belward Campus Drive reported 616 tCO₂e of greenhouse-gas emissions for 2024.

Where is 9920 Belward Campus Drive?

9920 Belward Campus Drive is in Montgomery County, Maryland 20879.

How big is 9920 Belward Campus Drive and when was it built?

9920 Belward Campus Drive has 51,181 sq ft of gross floor area, as reported in its 2024 disclosure. The disclosure lists 2012 as its year built. It is classed as laboratory.

Is 9920 Belward Campus Drive covered by the Benchmarking Law (Bill 2-14) / BEPS (Bill 16-21)?

Yes — it appears in the 2024 Commercial Building Energy Benchmarking disclosure, which lists the buildings reporting under the Benchmarking Law (Bill 2-14) / BEPS (Bill 16-21).

Working with Montgomery County building benchmarking records? Pro adds alerts, change history and CSV export ($49/mo); Enterprise adds full national files, the API and an MCP server for AI tools.

About this data

Source: Commercial Building Energy Benchmarking (Benchmarking Law (Bill 2-14) / BEPS (Bill 16-21)), as published October 2, 2026. See the methodology for how records are matched, cleaned and scored.

Cite as: BuildingCensus, “9920 Belward Campus Drive, Montgomery County, Maryland — 2024 benchmarking disclosure”, https://buildingcensus.com/buildings/montgomery-county/9920-belward-campus-drive-2c7f59fb (data as of October 2, 2026).