BuildingCensus
A

Ashmore Condominium Ii Building 10

Multifamily Housing in Montgomery County, MD · 19623-196025 Gallway Bay Circle · 20874

At a glance

Ashmore Condominium Ii Building 10 is a 28,433-square-foot multifamily housing building at 19623-196025 Gallway Bay Circle in Montgomery County, Maryland, built in 2008. In its 2024 Montgomery County benchmarking disclosure it reported an ENERGY STAR score of 94 out of 100 (grade A), a site energy-use intensity of 46.5 kBtu/ft² and 89 tCO₂e of greenhouse-gas emissions. That score is higher than 65% of the 514 scored multifamily housing buildings in Montgomery County.

ENERGY STAR score
94
band A · 2024
Site EUI
46.5
kBtu/ft²
GHG emissions
89
tCO₂e
GHG intensity
—
kgCO₂e/ft²
Floor area
28,433
sq ft
Year built
2008
vintage

Benchmarking Law (Bill 2-14) / BEPS (Bill 16-21) · reporting year 2024

Benchmarking record

FieldValue
ENERGY STAR score94 (band A)
Site EUI46.5 kBtu/ft²
Source EUI82.3 kBtu/ft²
GHG emissions89 tCO₂e
GHG intensity—
Electricity159,564 kWh
Natural gas7,771 therms
Gross floor area28,433 sq ft
Source recordmontgomery_county:33568898:2024

Compliance context

Benchmarking Law (Bill 2-14) / BEPS (Bill 16-21)

Montgomery County's BEPS (Bill 16-21; regulations approved in 2025) sets declining site-EUI standards for buildings of 25,000+ sq ft, with interim and then final standards later this decade and into the 2030s depending on building type.

Program details →

Ownership

No owning organisation shown. Names of private individuals in the disclosure are not published here.

Own or manage this building? Claim it to correct the record and get compliance alerts.

Location

Address
19623-196025 Gallway Bay Circle
State
Maryland
ZIP
20874

Within ~1 km

Nearby benchmarked buildings

This source publishes no coordinates, so nearby buildings can't be resolved yet.

See also: most efficient in Montgomery County · biggest emitters

How does Ashmore Condominium Ii Building 10 compare with other multifamily housing buildings in Montgomery County?

The latest disclosures cover 553 multifamily housing buildings in Montgomery County, out of 1,766 buildings citywide. Ashmore Condominium Ii Building 10's ENERGY STAR score of 94 compares with an average of 80 across the 514 that report a score; it scores higher than 65% of them and lower than 32%. Its site EUI of 46.5 kBtu/ft² is roughly in line with the average of 43.2 kBtu/ft².

At 28,433 sq ft, it is about 86% below the average floor area of 198,668 sq ft for those buildings. It was built in 2008, 19 years later than the group's average year built (1989). Across all 24 jurisdictions BuildingCensus covers, the 59,945 multifamily housing buildings average an ENERGY STAR score of 70 and a site EUI of 59.0 kBtu/ft².

What does an ENERGY STAR score of 94 mean?

ENERGY STAR scores run from 1 to 100 and are computed by the EPA's Portfolio Manager as a percentile against similar buildings nationwide, adjusted for climate, size and use: a score of 94 means the building performs better than about 94% of its national peers. BuildingCensus bands the score into report-card grades; 94 falls in band A — high performer (85–100). Scores of 75 or higher meet the threshold for ENERGY STAR certification; certification itself is a separate, verified application that the disclosure does not record. In Montgomery County, 53% of scored buildings are at 75 or above.

Site energy-use intensity (EUI) is the energy a building uses on site in a year divided by its floor area, in thousand Btu per square foot — lower is more efficient. Ashmore Condominium Ii Building 10's 46.5 kBtu/ft² across 28,433 sq ft works out to about 1.3 billion Btu (387 MWh-equivalent) in 2024. Its source EUI of 82.3 kBtu/ft² also counts the energy lost generating and delivering that power, which is why it is higher. The disclosure also reports 159,564 kWh of electricity and 7,771 therms of natural gas for the year.

Which law requires Ashmore Condominium Ii Building 10 to report its energy use?

Ashmore Condominium Ii Building 10 reports under the Benchmarking Law (Bill 2-14) / BEPS (Bill 16-21), the legal basis of Montgomery County's Commercial Building Energy Benchmarking program, which publishes each covered building's annual benchmarking results. The record shown here is the report-year 2024 disclosure (source record montgomery_county:33568898:2024). Montgomery County's BEPS (Bill 16-21; regulations approved in 2025) sets declining site-EUI standards for buildings of 25,000+ sq ft, with interim and then final standards later this decade and into the 2030s depending on building type.

More multifamily housing buildings in Montgomery County

Frequently asked questions

What is Ashmore Condominium Ii Building 10's energy grade?

Ashmore Condominium Ii Building 10 scores 94 out of 100 on ENERGY STAR — band A, high performer (85–100) — in its 2024 Montgomery County disclosure. Scores are national percentiles against similar buildings; 75+ qualifies for ENERGY STAR certification.

How much energy does Ashmore Condominium Ii Building 10 use?

Its 2024 site energy-use intensity was 46.5 kBtu/ft² (82.3 kBtu/ft² source) across 28,433 sq ft, including 159,564 kWh of electricity and 7,771 therms of natural gas.

What are Ashmore Condominium Ii Building 10's carbon emissions?

Ashmore Condominium Ii Building 10 reported 89 tCO₂e of greenhouse-gas emissions for 2024.

Where is Ashmore Condominium Ii Building 10?

Ashmore Condominium Ii Building 10 is at 19623-196025 Gallway Bay Circle, in Montgomery County, Maryland 20874.

How big is Ashmore Condominium Ii Building 10 and when was it built?

Ashmore Condominium Ii Building 10 has 28,433 sq ft of gross floor area, as reported in its 2024 disclosure. The disclosure lists 2008 as its year built. It is classed as multifamily housing.

Is Ashmore Condominium Ii Building 10 covered by the Benchmarking Law (Bill 2-14) / BEPS (Bill 16-21)?

Yes — it appears in the 2024 Commercial Building Energy Benchmarking disclosure, which lists the buildings reporting under the Benchmarking Law (Bill 2-14) / BEPS (Bill 16-21).

Working with Montgomery County building benchmarking records? Pro adds alerts, change history and CSV export ($49/mo); Enterprise adds full national files, the API and an MCP server for AI tools.

About this data

Source: Commercial Building Energy Benchmarking (Benchmarking Law (Bill 2-14) / BEPS (Bill 16-21)), as published October 2, 2026. See the methodology for how records are matched, cleaned and scored.

Cite as: BuildingCensus, “Ashmore Condominium Ii Building 10, Montgomery County, Maryland — 2024 benchmarking disclosure”, https://buildingcensus.com/buildings/montgomery-county/ashmore-condominium-ii-building-10-91a2ce2b (data as of October 2, 2026).