BuildingCensus
–

Autumn Lake Healthcare At Oakview

Residential Care Facility in Montgomery County, MD · 2700 Barker St · 20902

At a glance

Autumn Lake Healthcare At Oakview is a 51,279-square-foot residential care facility at 2700 Barker St in Montgomery County, Maryland, built in 1980. In its 2024 Montgomery County benchmarking disclosure it reported a site energy-use intensity of 95.7 kBtu/ft² and 373 tCO₂e of greenhouse-gas emissions.

ENERGY STAR score
—
not reported · 2024
Site EUI
95.7
kBtu/ft²
GHG emissions
373
tCO₂e
GHG intensity
—
kgCO₂e/ft²
Floor area
51,279
sq ft
Year built
1980
vintage

Benchmarking Law (Bill 2-14) / BEPS (Bill 16-21) · reporting year 2024

Benchmarking record

FieldValue
ENERGY STAR score—
Site EUI95.7 kBtu/ft²
Source EUI211.5 kBtu/ft²
GHG emissions373 tCO₂e
GHG intensity—
Electricity953,172 kWh
Natural gas16,542 therms
Gross floor area51,279 sq ft
Source recordmontgomery_county:35057794:2024

Compliance context

Benchmarking Law (Bill 2-14) / BEPS (Bill 16-21)

Montgomery County's BEPS (Bill 16-21; regulations approved in 2025) sets declining site-EUI standards for buildings of 25,000+ sq ft, with interim and then final standards later this decade and into the 2030s depending on building type.

Program details →

Ownership

No owning organisation shown. Names of private individuals in the disclosure are not published here.

Own or manage this building? Claim it to correct the record and get compliance alerts.

Location

Address
2700 Barker St
State
Maryland
ZIP
20902

Within ~1 km

Nearby benchmarked buildings

This source publishes no coordinates, so nearby buildings can't be resolved yet.

See also: most efficient in Montgomery County · biggest emitters

How does Autumn Lake Healthcare At Oakview compare with other residential care facility buildings in Montgomery County?

The latest disclosures cover 16 residential care facility buildings in Montgomery County, out of 1,766 buildings citywide. Its site EUI of 95.7 kBtu/ft² is roughly in line with the average of 101.3 kBtu/ft² — it uses less energy per square foot than the typical building in that group.

At 51,279 sq ft, it is about 14% below the average floor area of 59,856 sq ft for those buildings. It was built in 1980, 4 years earlier than the group's average year built (1984). Across all 24 jurisdictions BuildingCensus covers, the 321 residential care facility buildings average an ENERGY STAR score of 41 and a site EUI of 94.2 kBtu/ft².

What does a site EUI of 95.7 kBtu/ft² mean?

Site energy-use intensity (EUI) is the energy a building uses on site in a year divided by its floor area, in thousand Btu per square foot — lower is more efficient. Autumn Lake Healthcare At Oakview's 95.7 kBtu/ft² across 51,279 sq ft works out to about 4.9 billion Btu (1,438 MWh-equivalent) in 2024. Its source EUI of 211.5 kBtu/ft² also counts the energy lost generating and delivering that power, which is why it is higher. The disclosure also reports 953,172 kWh of electricity and 16,542 therms of natural gas for the year.

Which law requires Autumn Lake Healthcare At Oakview to report its energy use?

Autumn Lake Healthcare At Oakview reports under the Benchmarking Law (Bill 2-14) / BEPS (Bill 16-21), the legal basis of Montgomery County's Commercial Building Energy Benchmarking program, which publishes each covered building's annual benchmarking results. The record shown here is the report-year 2024 disclosure (source record montgomery_county:35057794:2024). Montgomery County's BEPS (Bill 16-21; regulations approved in 2025) sets declining site-EUI standards for buildings of 25,000+ sq ft, with interim and then final standards later this decade and into the 2030s depending on building type.

More residential care facility buildings in Montgomery County

Frequently asked questions

What is Autumn Lake Healthcare At Oakview's energy grade?

Autumn Lake Healthcare At Oakview did not report an ENERGY STAR score in its 2024 disclosure, but its site energy-use intensity was 95.7 kBtu/ft².

How much energy does Autumn Lake Healthcare At Oakview use?

Its 2024 site energy-use intensity was 95.7 kBtu/ft² (211.5 kBtu/ft² source) across 51,279 sq ft, including 953,172 kWh of electricity and 16,542 therms of natural gas.

What are Autumn Lake Healthcare At Oakview's carbon emissions?

Autumn Lake Healthcare At Oakview reported 373 tCO₂e of greenhouse-gas emissions for 2024.

Where is Autumn Lake Healthcare At Oakview?

Autumn Lake Healthcare At Oakview is at 2700 Barker St, in Montgomery County, Maryland 20902.

How big is Autumn Lake Healthcare At Oakview and when was it built?

Autumn Lake Healthcare At Oakview has 51,279 sq ft of gross floor area, as reported in its 2024 disclosure. The disclosure lists 1980 as its year built. It is classed as residential care facility.

Is Autumn Lake Healthcare At Oakview covered by the Benchmarking Law (Bill 2-14) / BEPS (Bill 16-21)?

Yes — it appears in the 2024 Commercial Building Energy Benchmarking disclosure, which lists the buildings reporting under the Benchmarking Law (Bill 2-14) / BEPS (Bill 16-21).

Working with Montgomery County building benchmarking records? Pro adds alerts, change history and CSV export ($49/mo); Enterprise adds full national files, the API and an MCP server for AI tools.

About this data

Source: Commercial Building Energy Benchmarking (Benchmarking Law (Bill 2-14) / BEPS (Bill 16-21)), as published October 2, 2026. See the methodology for how records are matched, cleaned and scored.

Cite as: BuildingCensus, “Autumn Lake Healthcare At Oakview, Montgomery County, Maryland — 2024 benchmarking disclosure”, https://buildingcensus.com/buildings/montgomery-county/autumn-lake-healthcare-at-oakview-7a091f0b (data as of October 2, 2026).