BuildingCensus
–

Brookville Mf- Bldg A.

Vehicle Repair Services in Montgomery County, MD · 8710 Brookville Rd · 20910

At a glance

Brookville Mf- Bldg A. is a 31,265-square-foot vehicle repair services building at 8710 Brookville Rd in Montgomery County, Maryland, built in 2000. In its 2024 Montgomery County benchmarking disclosure it reported a site energy-use intensity of 101.3 kBtu/ft² and 222 tCO₂e of greenhouse-gas emissions.

ENERGY STAR score
—
not reported · 2024
Site EUI
101.3
kBtu/ft²
GHG emissions
222
tCO₂e
GHG intensity
—
kgCO₂e/ft²
Floor area
31,265
sq ft
Year built
2000
vintage

Benchmarking Law (Bill 2-14) / BEPS (Bill 16-21) · reporting year 2024

Benchmarking record

FieldValue
ENERGY STAR score—
Site EUI101.3 kBtu/ft²
Source EUI192.5 kBtu/ft²
GHG emissions222 tCO₂e
GHG intensity—
Electricity451,123 kWh
Natural gas16,277 therms
Gross floor area31,265 sq ft
Source recordmontgomery_county:5244936:2024

The disclosure history

Year over year

YearScoreΔSite EUIGHG emissions
2024latest—101.3 kBtu/ft²222 tCO₂e
2023—87.9 kBtu/ft²193 tCO₂e

Compliance context

Benchmarking Law (Bill 2-14) / BEPS (Bill 16-21)

Montgomery County's BEPS (Bill 16-21; regulations approved in 2025) sets declining site-EUI standards for buildings of 25,000+ sq ft, with interim and then final standards later this decade and into the 2030s depending on building type.

Program details →

Ownership

No owning organisation shown. Names of private individuals in the disclosure are not published here.

Own or manage this building? Claim it to correct the record and get compliance alerts.

Location

Address
8710 Brookville Rd
State
Maryland
ZIP
20910

Within ~1 km

Nearby benchmarked buildings

This source publishes no coordinates, so nearby buildings can't be resolved yet.

See also: most efficient in Montgomery County · biggest emitters

How does Brookville Mf- Bldg A. compare with other vehicle repair services buildings in Montgomery County?

The latest disclosures cover 6 vehicle repair services buildings in Montgomery County, out of 1,766 buildings citywide. Its site EUI of 101.3 kBtu/ft² is about 20% below the average of 127.0 kBtu/ft² — it uses less energy per square foot than the typical building in that group.

At 31,265 sq ft, it is about 36% below the average floor area of 48,771 sq ft for those buildings. It was built in 2000, 11 years later than the group's average year built (1989).

How has Brookville Mf- Bldg A.'s energy performance changed over time?

BuildingCensus holds 2 Montgomery County disclosures for Brookville Mf- Bldg A., covering report years 2023–2024. Site EUI moved from 87.9 kBtu/ft² (2023) to 101.3 kBtu/ft² (2024), an 15% increase. Reported emissions went from 193 tCO₂e to 222 tCO₂e over the same span (up 15%).

What does a site EUI of 101.3 kBtu/ft² mean?

Site energy-use intensity (EUI) is the energy a building uses on site in a year divided by its floor area, in thousand Btu per square foot — lower is more efficient. Brookville Mf- Bldg A.'s 101.3 kBtu/ft² across 31,265 sq ft works out to about 3.2 billion Btu (928 MWh-equivalent) in 2024. Its source EUI of 192.5 kBtu/ft² also counts the energy lost generating and delivering that power, which is why it is higher. The disclosure also reports 451,123 kWh of electricity and 16,277 therms of natural gas for the year.

Which law requires Brookville Mf- Bldg A. to report its energy use?

Brookville Mf- Bldg A. reports under the Benchmarking Law (Bill 2-14) / BEPS (Bill 16-21), the legal basis of Montgomery County's Commercial Building Energy Benchmarking program, which publishes each covered building's annual benchmarking results. The record shown here is the report-year 2024 disclosure (source record montgomery_county:5244936:2024). Montgomery County's BEPS (Bill 16-21; regulations approved in 2025) sets declining site-EUI standards for buildings of 25,000+ sq ft, with interim and then final standards later this decade and into the 2030s depending on building type.

More vehicle repair services buildings in Montgomery County

Frequently asked questions

What is Brookville Mf- Bldg A.'s energy grade?

Brookville Mf- Bldg A. did not report an ENERGY STAR score in its 2024 disclosure, but its site energy-use intensity was 101.3 kBtu/ft².

How much energy does Brookville Mf- Bldg A. use?

Its 2024 site energy-use intensity was 101.3 kBtu/ft² (192.5 kBtu/ft² source) across 31,265 sq ft, including 451,123 kWh of electricity and 16,277 therms of natural gas.

What are Brookville Mf- Bldg A.'s carbon emissions?

Brookville Mf- Bldg A. reported 222 tCO₂e of greenhouse-gas emissions for 2024.

Where is Brookville Mf- Bldg A.?

Brookville Mf- Bldg A. is at 8710 Brookville Rd, in Montgomery County, Maryland 20910.

How big is Brookville Mf- Bldg A. and when was it built?

Brookville Mf- Bldg A. has 31,265 sq ft of gross floor area, as reported in its 2024 disclosure. The disclosure lists 2000 as its year built. It is classed as vehicle repair services.

Is Brookville Mf- Bldg A. covered by the Benchmarking Law (Bill 2-14) / BEPS (Bill 16-21)?

Yes — it appears in the 2024 Commercial Building Energy Benchmarking disclosure, which lists the buildings reporting under the Benchmarking Law (Bill 2-14) / BEPS (Bill 16-21).

Working with Montgomery County building benchmarking records? Pro adds alerts, change history and CSV export ($49/mo); Enterprise adds full national files, the API and an MCP server for AI tools.

About this data

Source: Commercial Building Energy Benchmarking (Benchmarking Law (Bill 2-14) / BEPS (Bill 16-21)), as published October 2, 2026. See the methodology for how records are matched, cleaned and scored.

Cite as: BuildingCensus, “Brookville Mf- Bldg A., Montgomery County, Maryland — 2024 benchmarking disclosure”, https://buildingcensus.com/buildings/montgomery-county/brookville-mf-bldg-a-f480397e (data as of October 2, 2026).