Dalton Apartments
Multifamily Housing in Montgomery County, MD · 733 Sligo Avenue · 20910
At a glance
Dalton Apartments is a 112,514-square-foot multifamily housing building at 733 Sligo Avenue in Montgomery County, Maryland, built in 1959. In its 2024 Montgomery County benchmarking disclosure it reported an ENERGY STAR score of 90 out of 100 (grade A), a site energy-use intensity of 50.7 kBtu/ft² and 372 tCO₂e of greenhouse-gas emissions. That score is higher than 54% of the 514 scored multifamily housing buildings in Montgomery County.
Benchmarking Law (Bill 2-14) / BEPS (Bill 16-21) · reporting year 2024
Benchmarking record
| Field | Value |
|---|---|
| ENERGY STAR score | 90 (band A) |
| Site EUI | 50.7 kBtu/ft² |
| Source EUI | 84.2 kBtu/ft² |
| GHG emissions | 372 tCO₂e |
| GHG intensity | — |
| Electricity | 584,190 kWh |
| Natural gas | 37,069 therms |
| Gross floor area | 112,514 sq ft |
| Source record | montgomery_county:19920689:2024 |
Compliance context
Benchmarking Law (Bill 2-14) / BEPS (Bill 16-21)
Montgomery County's BEPS (Bill 16-21; regulations approved in 2025) sets declining site-EUI standards for buildings of 25,000+ sq ft, with interim and then final standards later this decade and into the 2030s depending on building type.
Ownership
No owning organisation shown. Names of private individuals in the disclosure are not published here.
Own or manage this building? Claim it to correct the record and get compliance alerts.
Location
- Address
- 733 Sligo Avenue
- State
- Maryland
- ZIP
- 20910
Within ~1 km
Nearby benchmarked buildings
This source publishes no coordinates, so nearby buildings can't be resolved yet.
See also: most efficient in Montgomery County · biggest emitters
How does Dalton Apartments compare with other multifamily housing buildings in Montgomery County?
The latest disclosures cover 553 multifamily housing buildings in Montgomery County, out of 1,766 buildings citywide. Dalton Apartments's ENERGY STAR score of 90 compares with an average of 80 across the 514 that report a score; it scores higher than 54% of them and lower than 44%. Its site EUI of 50.7 kBtu/ft² is about 17% above the average of 43.2 kBtu/ft² — it uses more energy per square foot than the typical building in that group.
At 112,514 sq ft, it is about 43% below the average floor area of 198,668 sq ft for those buildings. It was built in 1959, 30 years earlier than the group's average year built (1989). Across all 24 jurisdictions BuildingCensus covers, the 59,945 multifamily housing buildings average an ENERGY STAR score of 70 and a site EUI of 59.0 kBtu/ft².
What does an ENERGY STAR score of 90 mean?
ENERGY STAR scores run from 1 to 100 and are computed by the EPA's Portfolio Manager as a percentile against similar buildings nationwide, adjusted for climate, size and use: a score of 90 means the building performs better than about 90% of its national peers. BuildingCensus bands the score into report-card grades; 90 falls in band A — high performer (85–100). Scores of 75 or higher meet the threshold for ENERGY STAR certification; certification itself is a separate, verified application that the disclosure does not record. In Montgomery County, 53% of scored buildings are at 75 or above.
Site energy-use intensity (EUI) is the energy a building uses on site in a year divided by its floor area, in thousand Btu per square foot — lower is more efficient. Dalton Apartments's 50.7 kBtu/ft² across 112,514 sq ft works out to about 5.7 billion Btu (1,672 MWh-equivalent) in 2024. Its source EUI of 84.2 kBtu/ft² also counts the energy lost generating and delivering that power, which is why it is higher. The disclosure also reports 584,190 kWh of electricity and 37,069 therms of natural gas for the year.
Which law requires Dalton Apartments to report its energy use?
Dalton Apartments reports under the Benchmarking Law (Bill 2-14) / BEPS (Bill 16-21), the legal basis of Montgomery County's Commercial Building Energy Benchmarking program, which publishes each covered building's annual benchmarking results. The record shown here is the report-year 2024 disclosure (source record montgomery_county:19920689:2024). Montgomery County's BEPS (Bill 16-21; regulations approved in 2025) sets declining site-EUI standards for buildings of 25,000+ sq ft, with interim and then final standards later this decade and into the 2030s depending on building type.
More multifamily housing buildings in Montgomery County
- Battery Park· 110,984 sq ft
- Landmark At Glenmont Station - Hp· 110,010 sq ft · score 74 (B)
- Park Bradford· 109,771 sq ft · score 79 (B)
- Towne Crest (To051)· 109,198 sq ft · score 79 (B)
- Silver Spring Art Space Camp· 109,184 sq ft
- Homecrest House South; Stein Building· 108,593 sq ft · score 69 (C)
- Multifamily Housing buildings in Montgomery County· 553 benchmarked
- All Montgomery County benchmarked buildings· Benchmarking Law (Bill 2-14) / BEPS (Bill 16-21)
- Most efficient large buildings in Montgomery County
- Least efficient large buildings in Montgomery County
- Biggest emitters in Montgomery County
Frequently asked questions
What is Dalton Apartments's energy grade?
Dalton Apartments scores 90 out of 100 on ENERGY STAR — band A, high performer (85–100) — in its 2024 Montgomery County disclosure. Scores are national percentiles against similar buildings; 75+ qualifies for ENERGY STAR certification.
How much energy does Dalton Apartments use?
Its 2024 site energy-use intensity was 50.7 kBtu/ft² (84.2 kBtu/ft² source) across 112,514 sq ft, including 584,190 kWh of electricity and 37,069 therms of natural gas.
What are Dalton Apartments's carbon emissions?
Dalton Apartments reported 372 tCO₂e of greenhouse-gas emissions for 2024.
Where is Dalton Apartments?
Dalton Apartments is at 733 Sligo Avenue, in Montgomery County, Maryland 20910.
How big is Dalton Apartments and when was it built?
Dalton Apartments has 112,514 sq ft of gross floor area, as reported in its 2024 disclosure. The disclosure lists 1959 as its year built. It is classed as multifamily housing.
Is Dalton Apartments covered by the Benchmarking Law (Bill 2-14) / BEPS (Bill 16-21)?
Yes — it appears in the 2024 Commercial Building Energy Benchmarking disclosure, which lists the buildings reporting under the Benchmarking Law (Bill 2-14) / BEPS (Bill 16-21).
Working with Montgomery County building benchmarking records? Pro adds alerts, change history and CSV export ($49/mo); Enterprise adds full national files, the API and an MCP server for AI tools.
About this data
Source: Commercial Building Energy Benchmarking (Benchmarking Law (Bill 2-14) / BEPS (Bill 16-21)), as published October 2, 2026. See the methodology for how records are matched, cleaned and scored.
Cite as: BuildingCensus, “Dalton Apartments, Montgomery County, Maryland — 2024 benchmarking disclosure”, https://buildingcensus.com/buildings/montgomery-county/dalton-apartments-624756e0 (data as of October 2, 2026).