BuildingCensus
A

Kenwood House

Multifamily Housing in Montgomery County, MD · 5100 Dorset Ave · 20816

At a glance

Kenwood House is a 107,959-square-foot multifamily housing building at 5100 Dorset Ave in Montgomery County, Maryland, built in 1960. In its 2024 Montgomery County benchmarking disclosure it reported an ENERGY STAR score of 93 out of 100 (grade A), a site energy-use intensity of 52.6 kBtu/ft² and 365 tCO₂e of greenhouse-gas emissions. That score is higher than 61% of the 514 scored multifamily housing buildings in Montgomery County.

ENERGY STAR score
93
band A · 2024
Site EUI
52.6
kBtu/ft²
GHG emissions
365
tCO₂e
GHG intensity
—
kgCO₂e/ft²
Floor area
107,959
sq ft
Year built
1960
vintage

Benchmarking Law (Bill 2-14) / BEPS (Bill 16-21) · reporting year 2024

Benchmarking record

FieldValue
ENERGY STAR score93 (band A)
Site EUI52.6 kBtu/ft²
Source EUI84.8 kBtu/ft²
GHG emissions365 tCO₂e
GHG intensity—
Electricity536,038 kWh
Natural gas38,456 therms
Gross floor area107,959 sq ft
Source recordmontgomery_county:32600358:2024

Compliance context

Benchmarking Law (Bill 2-14) / BEPS (Bill 16-21)

Montgomery County's BEPS (Bill 16-21; regulations approved in 2025) sets declining site-EUI standards for buildings of 25,000+ sq ft, with interim and then final standards later this decade and into the 2030s depending on building type.

Program details →

Ownership

No owning organisation shown. Names of private individuals in the disclosure are not published here.

Own or manage this building? Claim it to correct the record and get compliance alerts.

Location

Address
5100 Dorset Ave
State
Maryland
ZIP
20816

Within ~1 km

Nearby benchmarked buildings

This source publishes no coordinates, so nearby buildings can't be resolved yet.

See also: most efficient in Montgomery County · biggest emitters

How does Kenwood House compare with other multifamily housing buildings in Montgomery County?

The latest disclosures cover 553 multifamily housing buildings in Montgomery County, out of 1,766 buildings citywide. Kenwood House's ENERGY STAR score of 93 compares with an average of 80 across the 514 that report a score; it scores higher than 61% of them and lower than 35%. Its site EUI of 52.6 kBtu/ft² is about 22% above the average of 43.2 kBtu/ft² — it uses more energy per square foot than the typical building in that group.

At 107,959 sq ft, it is about half of the average floor area of 198,668 sq ft for those buildings. It was built in 1960, 29 years earlier than the group's average year built (1989). Across all 24 jurisdictions BuildingCensus covers, the 59,945 multifamily housing buildings average an ENERGY STAR score of 70 and a site EUI of 59.0 kBtu/ft².

What does an ENERGY STAR score of 93 mean?

ENERGY STAR scores run from 1 to 100 and are computed by the EPA's Portfolio Manager as a percentile against similar buildings nationwide, adjusted for climate, size and use: a score of 93 means the building performs better than about 93% of its national peers. BuildingCensus bands the score into report-card grades; 93 falls in band A — high performer (85–100). Scores of 75 or higher meet the threshold for ENERGY STAR certification; certification itself is a separate, verified application that the disclosure does not record. In Montgomery County, 53% of scored buildings are at 75 or above.

Site energy-use intensity (EUI) is the energy a building uses on site in a year divided by its floor area, in thousand Btu per square foot — lower is more efficient. Kenwood House's 52.6 kBtu/ft² across 107,959 sq ft works out to about 5.7 billion Btu (1,664 MWh-equivalent) in 2024. Its source EUI of 84.8 kBtu/ft² also counts the energy lost generating and delivering that power, which is why it is higher. The disclosure also reports 536,038 kWh of electricity and 38,456 therms of natural gas for the year.

Which law requires Kenwood House to report its energy use?

Kenwood House reports under the Benchmarking Law (Bill 2-14) / BEPS (Bill 16-21), the legal basis of Montgomery County's Commercial Building Energy Benchmarking program, which publishes each covered building's annual benchmarking results. The record shown here is the report-year 2024 disclosure (source record montgomery_county:32600358:2024). Montgomery County's BEPS (Bill 16-21; regulations approved in 2025) sets declining site-EUI standards for buildings of 25,000+ sq ft, with interim and then final standards later this decade and into the 2030s depending on building type.

More multifamily housing buildings in Montgomery County

Frequently asked questions

What is Kenwood House's energy grade?

Kenwood House scores 93 out of 100 on ENERGY STAR — band A, high performer (85–100) — in its 2024 Montgomery County disclosure. Scores are national percentiles against similar buildings; 75+ qualifies for ENERGY STAR certification.

How much energy does Kenwood House use?

Its 2024 site energy-use intensity was 52.6 kBtu/ft² (84.8 kBtu/ft² source) across 107,959 sq ft, including 536,038 kWh of electricity and 38,456 therms of natural gas.

What are Kenwood House's carbon emissions?

Kenwood House reported 365 tCO₂e of greenhouse-gas emissions for 2024.

Where is Kenwood House?

Kenwood House is at 5100 Dorset Ave, in Montgomery County, Maryland 20816.

How big is Kenwood House and when was it built?

Kenwood House has 107,959 sq ft of gross floor area, as reported in its 2024 disclosure. The disclosure lists 1960 as its year built. It is classed as multifamily housing.

Is Kenwood House covered by the Benchmarking Law (Bill 2-14) / BEPS (Bill 16-21)?

Yes — it appears in the 2024 Commercial Building Energy Benchmarking disclosure, which lists the buildings reporting under the Benchmarking Law (Bill 2-14) / BEPS (Bill 16-21).

Working with Montgomery County building benchmarking records? Pro adds alerts, change history and CSV export ($49/mo); Enterprise adds full national files, the API and an MCP server for AI tools.

About this data

Source: Commercial Building Energy Benchmarking (Benchmarking Law (Bill 2-14) / BEPS (Bill 16-21)), as published October 2, 2026. See the methodology for how records are matched, cleaned and scored.

Cite as: BuildingCensus, “Kenwood House, Montgomery County, Maryland — 2024 benchmarking disclosure”, https://buildingcensus.com/buildings/montgomery-county/kenwood-house-0bf5ec42 (data as of October 2, 2026).