Phase Electronics, Inc.
Manufacturing/Industrial Plant in Montgomery County, MD · 1017 Taft St · 20850
At a glance
Phase Electronics, Inc. is a 26,380-square-foot manufacturing/industrial plant at 1017 Taft St in Montgomery County, Maryland, built in 1984. In its 2024 Montgomery County benchmarking disclosure it reported a site energy-use intensity of 37.8 kBtu/ft² and 67 tCO₂e of greenhouse-gas emissions.
Benchmarking Law (Bill 2-14) / BEPS (Bill 16-21) · reporting year 2024
Benchmarking record
| Field | Value |
|---|---|
| ENERGY STAR score | — |
| Site EUI | 37.8 kBtu/ft² |
| Source EUI | 67.1 kBtu/ft² |
| GHG emissions | 67 tCO₂e |
| GHG intensity | — |
| Electricity | 121,172 kWh |
| Natural gas | 5,843 therms |
| Gross floor area | 26,380 sq ft |
| Source record | montgomery_county:26640496:2024 |
The disclosure history
Year over year
| Year | Score | Δ | Site EUI | GHG emissions |
|---|---|---|---|---|
| 2024latest | — | 37.8 kBtu/ft² | 67 tCO₂e | |
| 2023 | — | 37.1 kBtu/ft² | 68 tCO₂e |
Compliance context
Benchmarking Law (Bill 2-14) / BEPS (Bill 16-21)
Montgomery County's BEPS (Bill 16-21; regulations approved in 2025) sets declining site-EUI standards for buildings of 25,000+ sq ft, with interim and then final standards later this decade and into the 2030s depending on building type.
Ownership
No owning organisation shown. Names of private individuals in the disclosure are not published here.
Own or manage this building? Claim it to correct the record and get compliance alerts.
Location
- Address
- 1017 Taft St
- State
- Maryland
- ZIP
- 20850
Within ~1 km
Nearby benchmarked buildings
This source publishes no coordinates, so nearby buildings can't be resolved yet.
See also: most efficient in Montgomery County · biggest emitters
How does Phase Electronics, Inc. compare with other buildings in Montgomery County?
The latest disclosures cover 1,766 benchmarked buildings in Montgomery County. Its site EUI of 37.8 kBtu/ft² is about half of the average of 69.3 kBtu/ft² — it uses less energy per square foot than the typical building in that group.
At 26,380 sq ft, it is about 81% below the average floor area of 136,354 sq ft for those buildings. Its 1984 construction date is close to the group's average year built (1985). Across all 24 jurisdictions BuildingCensus covers, the 2,372 manufacturing/industrial plant buildings average an ENERGY STAR score of 67 and a site EUI of 126.3 kBtu/ft².
How has Phase Electronics, Inc.'s energy performance changed over time?
BuildingCensus holds 2 Montgomery County disclosures for Phase Electronics, Inc., covering report years 2023–2024. Site EUI moved from 37.1 kBtu/ft² (2023) to 37.8 kBtu/ft² (2024), an 2% increase. Reported emissions went from 68 tCO₂e to 67 tCO₂e over the same span (down 0%).
What does a site EUI of 37.8 kBtu/ft² mean?
Site energy-use intensity (EUI) is the energy a building uses on site in a year divided by its floor area, in thousand Btu per square foot — lower is more efficient. Phase Electronics, Inc.'s 37.8 kBtu/ft² across 26,380 sq ft works out to about 1 billion Btu (292 MWh-equivalent) in 2024. Its source EUI of 67.1 kBtu/ft² also counts the energy lost generating and delivering that power, which is why it is higher. The disclosure also reports 121,172 kWh of electricity and 5,843 therms of natural gas for the year.
Which law requires Phase Electronics, Inc. to report its energy use?
Phase Electronics, Inc. reports under the Benchmarking Law (Bill 2-14) / BEPS (Bill 16-21), the legal basis of Montgomery County's Commercial Building Energy Benchmarking program, which publishes each covered building's annual benchmarking results. The record shown here is the report-year 2024 disclosure (source record montgomery_county:26640496:2024). Montgomery County's BEPS (Bill 16-21; regulations approved in 2025) sets declining site-EUI standards for buildings of 25,000+ sq ft, with interim and then final standards later this decade and into the 2030s depending on building type.
More manufacturing/industrial plant buildings in Montgomery County
Frequently asked questions
What is Phase Electronics, Inc.'s energy grade?
Phase Electronics, Inc. did not report an ENERGY STAR score in its 2024 disclosure, but its site energy-use intensity was 37.8 kBtu/ft².
How much energy does Phase Electronics, Inc. use?
Its 2024 site energy-use intensity was 37.8 kBtu/ft² (67.1 kBtu/ft² source) across 26,380 sq ft, including 121,172 kWh of electricity and 5,843 therms of natural gas.
What are Phase Electronics, Inc.'s carbon emissions?
Phase Electronics, Inc. reported 67 tCO₂e of greenhouse-gas emissions for 2024.
Where is Phase Electronics, Inc.?
Phase Electronics, Inc. is at 1017 Taft St, in Montgomery County, Maryland 20850.
How big is Phase Electronics, Inc. and when was it built?
Phase Electronics, Inc. has 26,380 sq ft of gross floor area, as reported in its 2024 disclosure. The disclosure lists 1984 as its year built. It is classed as manufacturing/industrial plant.
Is Phase Electronics, Inc. covered by the Benchmarking Law (Bill 2-14) / BEPS (Bill 16-21)?
Yes — it appears in the 2024 Commercial Building Energy Benchmarking disclosure, which lists the buildings reporting under the Benchmarking Law (Bill 2-14) / BEPS (Bill 16-21).
Working with Montgomery County building benchmarking records? Pro adds alerts, change history and CSV export ($49/mo); Enterprise adds full national files, the API and an MCP server for AI tools.
About this data
Source: Commercial Building Energy Benchmarking (Benchmarking Law (Bill 2-14) / BEPS (Bill 16-21)), as published October 2, 2026. See the methodology for how records are matched, cleaned and scored.
Cite as: BuildingCensus, “Phase Electronics, Inc., Montgomery County, Maryland — 2024 benchmarking disclosure”, https://buildingcensus.com/buildings/montgomery-county/phase-electronics-inc-48f3cf91 (data as of October 2, 2026).