BuildingCensus
B

2 Penn

Office in Philadelphia, PA · 1500 John F. Kennedy Boulevard · 19103

At a glance

2 Penn is a 500,000-square-foot office building at 1500 John F. Kennedy Boulevard in Philadelphia, Pennsylvania, built in 1956. In its 2020 Philadelphia benchmarking disclosure it reported an ENERGY STAR score of 72 out of 100 (grade B), a site energy-use intensity of 53.4 kBtu/ft² and 2,359 tCO₂e of greenhouse-gas emissions. That score is higher than 52% of the 180 scored office buildings in Philadelphia.

ENERGY STAR score
72
band B · 2020
Site EUI
53.4
kBtu/ft²
GHG emissions
2,359
tCO₂e
GHG intensity
—
kgCO₂e/ft²
Floor area
500,000
sq ft
Year built
1956
vintage
◆ Loading map…
85–10070–8455–691–54
This entry + 6 nearby

Phila. Code §9-3402 / Building Energy Performance Program · reporting year 2020

Benchmarking record

FieldValue
ENERGY STAR score72 (band B)
Site EUI53.4 kBtu/ft²
Source EUI128.1 kBtu/ft²
GHG emissions2,359 tCO₂e
GHG intensity—
Electricity5,856,809 kWh
Water use15,133 kgal
Gross floor area500,000 sq ft
Source recordphiladelphia:3681289:2020

The disclosure history

Year over year

YearScoreΔSite EUIGHG emissions
2020latest72+453.4 kBtu/ft²2,359 tCO₂e
20196862.8 kBtu/ft²2,948 tCO₂e

Compliance context

Phila. Code §9-3402 / Building Energy Performance Program

Philadelphia requires commercial and multifamily buildings of 50,000+ sq ft to benchmark annually; its Building Energy Performance Program additionally requires non-residential buildings of 50,000+ sq ft to complete a tune-up or certify as high-performance every five years, with fines starting at $2,000 for non-compliance.

Program details →

Ownership

No owning organisation shown. Names of private individuals in the disclosure are not published here.

Own or manage this building? Claim it to correct the record and get compliance alerts.

Location

Address
1500 John F. Kennedy Boulevard
State
Pennsylvania
ZIP
19103
Coordinates
39.95338, -75.16589

Within ~1 km

Nearby benchmarked buildings

See also: most efficient in Philadelphia · biggest emitters

How does 2 Penn compare with other office buildings in Philadelphia?

The latest disclosures cover 212 office buildings in Philadelphia, out of 2,379 buildings citywide. 2 Penn's ENERGY STAR score of 72 compares with an average of 64 across the 180 that report a score; it scores higher than 52% of them and lower than 47%. Its site EUI of 53.4 kBtu/ft² is about 32% below the average of 78.3 kBtu/ft² — it uses less energy per square foot than the typical building in that group.

At 500,000 sq ft, it is about 71% above the average floor area of 292,223 sq ft for those buildings. Its 1956 construction date is close to the group's average year built (1957). Across all 24 jurisdictions BuildingCensus covers, the 15,264 office buildings average an ENERGY STAR score of 73 and a site EUI of 59.3 kBtu/ft².

How has 2 Penn's energy performance changed over time?

BuildingCensus holds 2 Philadelphia disclosures for 2 Penn, covering report years 2019–2020. Its ENERGY STAR score went from 68 in 2019 to 72 in 2020 (+4 points). Site EUI moved from 62.8 kBtu/ft² (2019) to 53.4 kBtu/ft² (2020), a 15% decrease. Reported emissions went from 2,948 tCO₂e to 2,359 tCO₂e over the same span (down 20%).

What does an ENERGY STAR score of 72 mean?

ENERGY STAR scores run from 1 to 100 and are computed by the EPA's Portfolio Manager as a percentile against similar buildings nationwide, adjusted for climate, size and use: a score of 72 means the building performs better than about 72% of its national peers. BuildingCensus bands the score into report-card grades; 72 falls in band B — above median (70–84). It sits 3 points below 75, the threshold for ENERGY STAR certification. In Philadelphia, 35% of scored buildings are at 75 or above.

Site energy-use intensity (EUI) is the energy a building uses on site in a year divided by its floor area, in thousand Btu per square foot — lower is more efficient. 2 Penn's 53.4 kBtu/ft² across 500,000 sq ft works out to about 26.7 billion Btu (7,825 MWh-equivalent) in 2020. Its source EUI of 128.1 kBtu/ft² also counts the energy lost generating and delivering that power, which is why it is higher. The disclosure also reports 5,856,809 kWh of electricity and 15,133 thousand gallons of water for the year.

Which law requires 2 Penn to report its energy use?

2 Penn reports under Phila. Code §9-3402 / Building Energy Performance Program, the legal basis of Philadelphia's Building Energy Benchmarking program, which publishes each covered building's annual benchmarking results. The record shown here is the report-year 2020 disclosure (source record philadelphia:3681289:2020). Philadelphia requires commercial and multifamily buildings of 50,000+ sq ft to benchmark annually; its Building Energy Performance Program additionally requires non-residential buildings of 50,000+ sq ft to complete a tune-up or certify as high-performance every five years, with fines starting at $2,000 for non-compliance.

More office buildings in Philadelphia

Frequently asked questions

What is 2 Penn's energy grade?

2 Penn scores 72 out of 100 on ENERGY STAR — band B, above median (70–84) — in its 2020 Philadelphia disclosure. Scores are national percentiles against similar buildings; 75+ qualifies for ENERGY STAR certification.

How much energy does 2 Penn use?

Its 2020 site energy-use intensity was 53.4 kBtu/ft² (128.1 kBtu/ft² source) across 500,000 sq ft, including 5,856,809 kWh of electricity.

What are 2 Penn's carbon emissions?

2 Penn reported 2,359 tCO₂e of greenhouse-gas emissions for 2020.

Where is 2 Penn?

2 Penn is at 1500 John F. Kennedy Boulevard, in Philadelphia, Pennsylvania 19103. Its coordinates are 39.95338, -75.16589 (latitude, longitude), as published in the Building Energy Benchmarking file.

How big is 2 Penn and when was it built?

2 Penn has 500,000 sq ft of gross floor area, as reported in its 2020 disclosure. The disclosure lists 1956 as its year built. It is classed as office.

Is 2 Penn covered by Phila. Code §9-3402 / Building Energy Performance Program?

Yes — it appears in the 2020 Building Energy Benchmarking disclosure, which lists the buildings reporting under Phila. Code §9-3402 / Building Energy Performance Program.

Working with Philadelphia building benchmarking records? Pro adds alerts, change history and CSV export ($49/mo); Enterprise adds full national files, the API and an MCP server for AI tools.

About this data

Source: Building Energy Benchmarking (Phila. Code §9-3402 / Building Energy Performance Program), as published July 9, 2026. See the methodology for how records are matched, cleaned and scored.

Cite as: BuildingCensus, “2 Penn, Philadelphia, Pennsylvania — 2020 benchmarking disclosure”, https://buildingcensus.com/buildings/philadelphia/2-penn-859c9ddc (data as of July 9, 2026).