BuildingCensus
B

1710 T St SE

Multifamily Housing in Washington, DC, DC · 20020

At a glance

1710 T St SE is a 30,784-square-foot multifamily housing building in Washington, DC, built in 1968. In its 2024 Washington, DC benchmarking disclosure it reported an ENERGY STAR score of 74 out of 100 (grade B), a site energy-use intensity of 35.5 kBtu/ft² and 96 tCO₂e of greenhouse-gas emissions. That score is higher than 42% of the 1,618 scored multifamily housing buildings in Washington, DC.

ENERGY STAR score
74
band B · 2024
Site EUI
35.5
kBtu/ft²
GHG emissions
96
tCO₂e
GHG intensity
3.1
kgCO₂e/ft²
Floor area
30,784
sq ft
Year built
1968
vintage
◆ Loading map…
85–10070–8455–691–54
This entry + 6 nearby

Clean and Affordable Energy Act / BEPS · reporting year 2024

Benchmarking record

FieldValue
ENERGY STAR score74 (band B)
Site EUI35.5 kBtu/ft²
Source EUI99.5 kBtu/ft²
GHG emissions96 tCO₂e
GHG intensity3.1 kgCO₂e/ft²
Electricity320,642 kWh
Natural gas0 therms
Water use866 kgal
Gross floor area30,784 sq ft
Source recorddc:PM19573871:2024

The disclosure history

Year over year

YearScoreΔSite EUIGHG emissions
2024latest74-1335.5 kBtu/ft²96 tCO₂e
202387+529.7 kBtu/ft²82 tCO₂e
20228233.6 kBtu/ft²93 tCO₂e

Compliance context

Clean and Affordable Energy Act / BEPS

DC's Building Energy Performance Standards (BEPS) require buildings below the performance standard to improve over compliance cycles (the first ends December 31, 2026; later cycles run five years), with penalties for buildings that fail to meet their pathway.

Program details →

Ownership

JASPER29T LIMITED PARTNERSHIP

Own or manage this building? Claim it to correct the record and get compliance alerts.

Location

Address
1710 T St SE
State
District of Columbia
ZIP
20020
Coordinates
38.86752, -76.97987

Within ~1 km

Nearby benchmarked buildings

See also: most efficient in Washington, DC · biggest emitters

How does 1710 T St SE compare with other multifamily housing buildings in Washington, DC?

The latest disclosures cover 1,799 multifamily housing buildings in Washington, DC, out of 6,870 buildings citywide. 1710 T St SE's ENERGY STAR score of 74 compares with an average of 72 across the 1,618 that report a score; it scores higher than 42% of them and lower than 56%. Its site EUI of 35.5 kBtu/ft² is about 31% below the average of 51.1 kBtu/ft² — it uses less energy per square foot than the typical building in that group. Its emissions intensity of 3.1 kgCO₂e/ft² is about 18% below the group average of 3.8 kgCO₂e/ft².

At 30,784 sq ft, it is about 77% below the average floor area of 136,346 sq ft for those buildings. Its 1968 construction date is close to the group's average year built (1965). Across all 24 jurisdictions BuildingCensus covers, the 59,945 multifamily housing buildings average an ENERGY STAR score of 70 and a site EUI of 59.0 kBtu/ft².

How has 1710 T St SE's energy performance changed over time?

BuildingCensus holds 3 Washington, DC disclosures for 1710 T St SE, covering report years 2022–2024. Its ENERGY STAR score went from 82 in 2022 to 74 in 2024 (-8 points); its best year on file was 2023, at 87. Site EUI moved from 33.6 kBtu/ft² (2022) to 35.5 kBtu/ft² (2024), an 6% increase. Reported emissions went from 93 tCO₂e to 96 tCO₂e over the same span (up 3%).

What does an ENERGY STAR score of 74 mean?

ENERGY STAR scores run from 1 to 100 and are computed by the EPA's Portfolio Manager as a percentile against similar buildings nationwide, adjusted for climate, size and use: a score of 74 means the building performs better than about 74% of its national peers. BuildingCensus bands the score into report-card grades; 74 falls in band B — above median (70–84). It sits 1 points below 75, the threshold for ENERGY STAR certification. In Washington, DC, 47% of scored buildings are at 75 or above.

Site energy-use intensity (EUI) is the energy a building uses on site in a year divided by its floor area, in thousand Btu per square foot — lower is more efficient. 1710 T St SE's 35.5 kBtu/ft² across 30,784 sq ft works out to about 1.1 billion Btu (320 MWh-equivalent) in 2024. Its source EUI of 99.5 kBtu/ft² also counts the energy lost generating and delivering that power, which is why it is higher. The disclosure also reports 320,642 kWh of electricity, 0 therms of natural gas and 866 thousand gallons of water for the year.

Which law requires 1710 T St SE to report its energy use?

1710 T St SE reports under the Clean and Affordable Energy Act / BEPS, the legal basis of Washington, DC's Building Energy Benchmarking program, which publishes each covered building's annual benchmarking results. The record shown here is the report-year 2024 disclosure (source record dc:PM19573871:2024). DC's Building Energy Performance Standards (BEPS) require buildings below the performance standard to improve over compliance cycles (the first ends December 31, 2026; later cycles run five years), with penalties for buildings that fail to meet their pathway.

More multifamily housing buildings in Washington, DC

Frequently asked questions

What is 1710 T St SE's energy grade?

1710 T St SE scores 74 out of 100 on ENERGY STAR — band B, above median (70–84) — in its 2024 Washington, DC disclosure. Scores are national percentiles against similar buildings; 75+ qualifies for ENERGY STAR certification.

How much energy does 1710 T St SE use?

Its 2024 site energy-use intensity was 35.5 kBtu/ft² (99.5 kBtu/ft² source) across 30,784 sq ft, including 320,642 kWh of electricity and 0 therms of natural gas.

What are 1710 T St SE's carbon emissions?

1710 T St SE reported 96 tCO₂e of greenhouse-gas emissions (3.1 kgCO₂e/ft²) for 2024.

Where is 1710 T St SE?

1710 T St SE is in Washington, DC 20020. Its coordinates are 38.86752, -76.97987 (latitude, longitude), as published in the Building Energy Benchmarking file.

How big is 1710 T St SE and when was it built?

1710 T St SE has 30,784 sq ft of gross floor area, as reported in its 2024 disclosure. The disclosure lists 1968 as its year built. It is classed as multifamily housing.

Is 1710 T St SE covered by the Clean and Affordable Energy Act / BEPS?

Yes — it appears in the 2024 Building Energy Benchmarking disclosure, which lists the buildings reporting under the Clean and Affordable Energy Act / BEPS.

Working with Washington, DC building benchmarking records? Pro adds alerts, change history and CSV export ($49/mo); Enterprise adds full national files, the API and an MCP server for AI tools.

About this data

Source: Building Energy Benchmarking (Clean and Affordable Energy Act / BEPS), as published July 9, 2026. See the methodology for how records are matched, cleaned and scored.

Cite as: BuildingCensus, “1710 T St SE, Washington, DC — 2024 benchmarking disclosure”, https://buildingcensus.com/buildings/washington-dc/1710-t-st-se-a760d42f (data as of July 9, 2026).