American Chemical Society - 1550 Building

How does American Chemical Society - 1550 Building compare with other office buildings in Washington, DC?

The latest disclosures cover 899 office buildings in Washington, DC, out of 6,870 buildings citywide. American Chemical Society - 1550 Building's ENERGY STAR score of 89 compares with an average of 70 across the 774 that report a score; it scores higher than 87% of them and lower than 11%. Its site EUI of 38.2 kBtu/ft² is about 31% below the average of 55.6 kBtu/ft² — it uses less energy per square foot than the typical building in that group. Its emissions intensity of 3.4 kgCO₂e/ft² is about 33% below the group average of 5.0 kgCO₂e/ft².

At 85,277 sq ft, it is about 61% below the average floor area of 216,135 sq ft for those buildings. It was built in 1988, 14 years later than the group's average year built (1974). Across all 24 jurisdictions BuildingCensus covers, the 15,264 office buildings average an ENERGY STAR score of 73 and a site EUI of 59.3 kBtu/ft².

How has American Chemical Society - 1550 Building's energy performance changed over time?

BuildingCensus holds 13 Washington, DC disclosures for American Chemical Society - 1550 Building, covering report years 2012–2024. Its ENERGY STAR score went from 90 in 2012 to 89 in 2024 (-1 points); its best year on file was 2016, at 91. Site EUI moved from 46.9 kBtu/ft² (2012) to 38.2 kBtu/ft² (2024), a 19% decrease. Reported emissions went from 567 tCO₂e to 286 tCO₂e over the same span (down 50%).

What does an ENERGY STAR score of 89 mean?

ENERGY STAR scores run from 1 to 100 and are computed by the EPA's Portfolio Manager as a percentile against similar buildings nationwide, adjusted for climate, size and use: a score of 89 means the building performs better than about 89% of its national peers. BuildingCensus bands the score into report-card grades; 89 falls in band A — high performer (85–100). Scores of 75 or higher meet the threshold for ENERGY STAR certification; certification itself is a separate, verified application that the disclosure does not record. In Washington, DC, 47% of scored buildings are at 75 or above.

Site energy-use intensity (EUI) is the energy a building uses on site in a year divided by its floor area, in thousand Btu per square foot — lower is more efficient. American Chemical Society - 1550 Building's 38.2 kBtu/ft² across 85,277 sq ft works out to about 3.3 billion Btu (955 MWh-equivalent) in 2024. Its source EUI of 106.9 kBtu/ft² also counts the energy lost generating and delivering that power, which is why it is higher. The disclosure also reports 953,859 kWh of electricity, 0 therms of natural gas and 606 thousand gallons of water for the year.

Which law requires American Chemical Society - 1550 Building to report its energy use?

American Chemical Society - 1550 Building reports under the Clean and Affordable Energy Act / BEPS, the legal basis of Washington, DC's Building Energy Benchmarking program, which publishes each covered building's annual benchmarking results. The record shown here is the report-year 2024 disclosure (source record dc:PM1034332:2024). DC's Building Energy Performance Standards (BEPS) require buildings below the performance standard to improve over compliance cycles (the first ends December 31, 2026; later cycles run five years), with penalties for buildings that fail to meet their pathway.