Aventine Fort Totten Building 3
Multifamily Housing in Washington, DC, DC · 350 Galloway Street, NE · 20011
At a glance
Aventine Fort Totten Building 3 is a 54,533-square-foot multifamily housing building at 350 Galloway Street, NE in Washington, DC, built in 2008. In its 2016 Washington, DC benchmarking disclosure it reported an ENERGY STAR score of 93 out of 100 (grade A), a site energy-use intensity of 32.3 kBtu/ft² and 202 tCO₂e of greenhouse-gas emissions. That score is higher than 76% of the 1,618 scored multifamily housing buildings in Washington, DC.
Clean and Affordable Energy Act / BEPS · reporting year 2016
Benchmarking record
| Field | Value |
|---|---|
| ENERGY STAR score | 93 (band A) |
| Site EUI | 32.3 kBtu/ft² |
| Source EUI | 101.5 kBtu/ft² |
| GHG emissions | 202 tCO₂e |
| GHG intensity | 3.7 kgCO₂e/ft² |
| Electricity | 516,457 kWh |
| Natural gas | 0 therms |
| Water use | 2,398 kgal |
| Gross floor area | 54,533 sq ft |
| Source record | dc:PM4378445:2016 |
The disclosure history
Year over year
| Year | Score | Δ | Site EUI | GHG emissions |
|---|---|---|---|---|
| 2016latest | 93 | ±0 | 32.3 kBtu/ft² | 202 tCO₂e |
| 2015 | 93 | -7 | 32.4 kBtu/ft² | 202 tCO₂e |
| 2014 | 100 | ±0 | 6.4 kBtu/ft² | 47 tCO₂e |
| 2013 | 100 | 7.5 kBtu/ft² | 55 tCO₂e |
Compliance context
Clean and Affordable Energy Act / BEPS
DC's Building Energy Performance Standards (BEPS) require buildings below the performance standard to improve over compliance cycles (the first ends December 31, 2026; later cycles run five years), with penalties for buildings that fail to meet their pathway.
Ownership
W M A T A
Own or manage this building? Claim it to correct the record and get compliance alerts.
Location
- Address
- 350 Galloway Street, NE
- City
- Washington, DC
- State
- District of Columbia
- ZIP
- 20011
- Coordinates
- 38.95291, -77.00018
Within ~1 km
Nearby benchmarked buildings
Multifamily Housing · 636,336 sq ft
- Providence Hospital - DCscore 31
Hospital (General Medical & Surgical) · 614,191 sq ft
- Fort Totten Square (ft13 & fn82)score 66
Multifamily Housing · 481,171 sq ft
- Aventine Fort Tottenscore 53
Multifamily Housing · 256,888 sq ft
- Carroll Manor Nursing and Rehabscore 61
Senior Living Community · 196,500 sq ft
- Caroll Manorscore —
Outpatient Rehabilitation/Physical Therapy · 169,000 sq ft
See also: most efficient in Washington, DC · biggest emitters
How does Aventine Fort Totten Building 3 compare with other multifamily housing buildings in Washington, DC?
The latest disclosures cover 1,799 multifamily housing buildings in Washington, DC, out of 6,870 buildings citywide. Aventine Fort Totten Building 3's ENERGY STAR score of 93 compares with an average of 72 across the 1,618 that report a score; it scores higher than 76% of them and lower than 22%. Its site EUI of 32.3 kBtu/ft² is about 37% below the average of 51.1 kBtu/ft² — it uses less energy per square foot than the typical building in that group. Its emissions intensity of 3.7 kgCO₂e/ft² is roughly in line with the group average of 3.8 kgCO₂e/ft².
At 54,533 sq ft, it is about 60% below the average floor area of 136,346 sq ft for those buildings. It was built in 2008, 43 years later than the group's average year built (1965). Across all 24 jurisdictions BuildingCensus covers, the 59,945 multifamily housing buildings average an ENERGY STAR score of 70 and a site EUI of 59.0 kBtu/ft².
How has Aventine Fort Totten Building 3's energy performance changed over time?
BuildingCensus holds 4 Washington, DC disclosures for Aventine Fort Totten Building 3, covering report years 2013–2016. Its ENERGY STAR score went from 100 in 2013 to 93 in 2016 (-7 points); its best year on file was 2013, at 100. Site EUI moved from 7.5 kBtu/ft² (2013) to 32.3 kBtu/ft² (2016), an 331% increase. Reported emissions went from 55 tCO₂e to 202 tCO₂e over the same span (up 270%).
What does an ENERGY STAR score of 93 mean?
ENERGY STAR scores run from 1 to 100 and are computed by the EPA's Portfolio Manager as a percentile against similar buildings nationwide, adjusted for climate, size and use: a score of 93 means the building performs better than about 93% of its national peers. BuildingCensus bands the score into report-card grades; 93 falls in band A — high performer (85–100). Scores of 75 or higher meet the threshold for ENERGY STAR certification; certification itself is a separate, verified application that the disclosure does not record. In Washington, DC, 47% of scored buildings are at 75 or above.
Site energy-use intensity (EUI) is the energy a building uses on site in a year divided by its floor area, in thousand Btu per square foot — lower is more efficient. Aventine Fort Totten Building 3's 32.3 kBtu/ft² across 54,533 sq ft works out to about 1.8 billion Btu (516 MWh-equivalent) in 2016. Its source EUI of 101.5 kBtu/ft² also counts the energy lost generating and delivering that power, which is why it is higher. The disclosure also reports 516,457 kWh of electricity, 0 therms of natural gas and 2,398 thousand gallons of water for the year.
Which law requires Aventine Fort Totten Building 3 to report its energy use?
Aventine Fort Totten Building 3 reports under the Clean and Affordable Energy Act / BEPS, the legal basis of Washington, DC's Building Energy Benchmarking program, which publishes each covered building's annual benchmarking results. The record shown here is the report-year 2016 disclosure (source record dc:PM4378445:2016). DC's Building Energy Performance Standards (BEPS) require buildings below the performance standard to improve over compliance cycles (the first ends December 31, 2026; later cycles run five years), with penalties for buildings that fail to meet their pathway.
More multifamily housing buildings in Washington, DC
- The Colonel· 54,496 sq ft · score 1 (D)
- Eastmont Cooperative· 54,456 sq ft · score 98 (A)
- Reserve Condominium· 54,400 sq ft · score 97 (A)
- Le Bourget· 54,144 sq ft · score 81 (B)
- Lincoln Park Terrace· 53,883 sq ft · score 72 (B)
- Cavanaugh Court· 53,621 sq ft · score 100 (A)
- Multifamily Housing buildings in Washington, DC· 1,799 benchmarked
- All Washington, DC benchmarked buildings· Clean and Affordable Energy Act / BEPS
- Most efficient large buildings in Washington, DC
- Least efficient large buildings in Washington, DC
- Biggest emitters in Washington, DC
Frequently asked questions
What is Aventine Fort Totten Building 3's energy grade?
Aventine Fort Totten Building 3 scores 93 out of 100 on ENERGY STAR — band A, high performer (85–100) — in its 2016 Washington, DC disclosure. Scores are national percentiles against similar buildings; 75+ qualifies for ENERGY STAR certification.
How much energy does Aventine Fort Totten Building 3 use?
Its 2016 site energy-use intensity was 32.3 kBtu/ft² (101.5 kBtu/ft² source) across 54,533 sq ft, including 516,457 kWh of electricity and 0 therms of natural gas.
What are Aventine Fort Totten Building 3's carbon emissions?
Aventine Fort Totten Building 3 reported 202 tCO₂e of greenhouse-gas emissions (3.7 kgCO₂e/ft²) for 2016.
Where is Aventine Fort Totten Building 3?
Aventine Fort Totten Building 3 is at 350 Galloway Street, NE, in Washington, DC 20011. Its coordinates are 38.95291, -77.00018 (latitude, longitude), as published in the Building Energy Benchmarking file.
How big is Aventine Fort Totten Building 3 and when was it built?
Aventine Fort Totten Building 3 has 54,533 sq ft of gross floor area, as reported in its 2016 disclosure. The disclosure lists 2008 as its year built. It is classed as multifamily housing.
Is Aventine Fort Totten Building 3 covered by the Clean and Affordable Energy Act / BEPS?
Yes — it appears in the 2016 Building Energy Benchmarking disclosure, which lists the buildings reporting under the Clean and Affordable Energy Act / BEPS.
Working with Washington, DC building benchmarking records? Pro adds alerts, change history and CSV export ($49/mo); Enterprise adds full national files, the API and an MCP server for AI tools.
About this data
Source: Building Energy Benchmarking (Clean and Affordable Energy Act / BEPS), as published July 9, 2026. See the methodology for how records are matched, cleaned and scored.
Cite as: BuildingCensus, “Aventine Fort Totten Building 3, Washington, DC — 2016 benchmarking disclosure”, https://buildingcensus.com/buildings/washington-dc/aventine-fort-totten-building-3-e1744988 (data as of July 9, 2026).