Insignia on M (ng39) (ng64)

How does Insignia on M (ng39) (ng64) compare with other multifamily housing buildings in Washington, DC?

The latest disclosures cover 1,799 multifamily housing buildings in Washington, DC, out of 6,870 buildings citywide. Insignia on M (ng39) (ng64)'s ENERGY STAR score of 76 compares with an average of 72 across the 1,618 that report a score; it scores higher than 46% of them and lower than 53%. Its site EUI of 50.7 kBtu/ft² is roughly in line with the average of 51.1 kBtu/ft² — it uses less energy per square foot than the typical building in that group. Its emissions intensity of 4.0 kgCO₂e/ft² is roughly in line with the group average of 3.8 kgCO₂e/ft².

At 256,806 sq ft, it is about 88% above the average floor area of 136,346 sq ft for those buildings. It was built in 2016, 51 years later than the group's average year built (1965). Across all 24 jurisdictions BuildingCensus covers, the 59,945 multifamily housing buildings average an ENERGY STAR score of 70 and a site EUI of 59.0 kBtu/ft².

How has Insignia on M (ng39) (ng64)'s energy performance changed over time?

BuildingCensus holds 7 Washington, DC disclosures for Insignia on M (ng39) (ng64), covering report years 2018–2024. Its ENERGY STAR score went from 95 in 2018 to 76 in 2024 (-19 points); its best year on file was 2018, at 95. Site EUI moved from 34.2 kBtu/ft² (2018) to 50.7 kBtu/ft² (2024), an 48% increase. Reported emissions went from 839 tCO₂e to 1,017 tCO₂e over the same span (up 21%).

What does an ENERGY STAR score of 76 mean?

ENERGY STAR scores run from 1 to 100 and are computed by the EPA's Portfolio Manager as a percentile against similar buildings nationwide, adjusted for climate, size and use: a score of 76 means the building performs better than about 76% of its national peers. BuildingCensus bands the score into report-card grades; 76 falls in band B — above median (70–84). Scores of 75 or higher meet the threshold for ENERGY STAR certification; certification itself is a separate, verified application that the disclosure does not record. In Washington, DC, 47% of scored buildings are at 75 or above.

Site energy-use intensity (EUI) is the energy a building uses on site in a year divided by its floor area, in thousand Btu per square foot — lower is more efficient. Insignia on M (ng39) (ng64)'s 50.7 kBtu/ft² across 256,806 sq ft works out to about 13 billion Btu (3,816 MWh-equivalent) in 2024. Its source EUI of 117.3 kBtu/ft² also counts the energy lost generating and delivering that power, which is why it is higher. The disclosure also reports 2,757,146 kWh of electricity, 36,023 therms of natural gas and 11,521 thousand gallons of water for the year.

Which law requires Insignia on M (ng39) (ng64) to report its energy use?

Insignia on M (ng39) (ng64) reports under the Clean and Affordable Energy Act / BEPS, the legal basis of Washington, DC's Building Energy Benchmarking program, which publishes each covered building's annual benchmarking results. The record shown here is the report-year 2024 disclosure (source record dc:PM6046211:2024). DC's Building Energy Performance Standards (BEPS) require buildings below the performance standard to improve over compliance cycles (the first ends December 31, 2026; later cycles run five years), with penalties for buildings that fail to meet their pathway.