Park Pleasant Apartments - (pr432)

How does Park Pleasant Apartments - (pr432) compare with other multifamily housing buildings in Washington, DC?

The latest disclosures cover 1,799 multifamily housing buildings in Washington, DC, out of 6,870 buildings citywide. Park Pleasant Apartments - (pr432)'s ENERGY STAR score of 72 compares with an average of 72 across the 1,618 that report a score; it scores higher than 40% of them and lower than 59%. Its site EUI of 33.8 kBtu/ft² is about 34% below the average of 51.1 kBtu/ft² — it uses less energy per square foot than the typical building in that group. Its emissions intensity of 2.4 kgCO₂e/ft² is about 38% below the group average of 3.8 kgCO₂e/ft².

At 82,500 sq ft, it is about 39% below the average floor area of 136,346 sq ft for those buildings. Its 1964 construction date is close to the group's average year built (1965). Across all 24 jurisdictions BuildingCensus covers, the 59,945 multifamily housing buildings average an ENERGY STAR score of 70 and a site EUI of 59.0 kBtu/ft².

How has Park Pleasant Apartments - (pr432)'s energy performance changed over time?

BuildingCensus holds 4 Washington, DC disclosures for Park Pleasant Apartments - (pr432), covering report years 2021–2024. Its ENERGY STAR score went from 100 in 2021 to 72 in 2024 (-28 points); its best year on file was 2021, at 100. Site EUI moved from 13.9 kBtu/ft² (2021) to 33.8 kBtu/ft² (2024), an 143% increase. Reported emissions went from 98 tCO₂e to 194 tCO₂e over the same span (up 99%).

What does an ENERGY STAR score of 72 mean?

ENERGY STAR scores run from 1 to 100 and are computed by the EPA's Portfolio Manager as a percentile against similar buildings nationwide, adjusted for climate, size and use: a score of 72 means the building performs better than about 72% of its national peers. BuildingCensus bands the score into report-card grades; 72 falls in band B — above median (70–84). It sits 3 points below 75, the threshold for ENERGY STAR certification. In Washington, DC, 47% of scored buildings are at 75 or above.

Site energy-use intensity (EUI) is the energy a building uses on site in a year divided by its floor area, in thousand Btu per square foot — lower is more efficient. Park Pleasant Apartments - (pr432)'s 33.8 kBtu/ft² across 82,500 sq ft works out to about 2.8 billion Btu (817 MWh-equivalent) in 2024. Its source EUI of 72.5 kBtu/ft² also counts the energy lost generating and delivering that power, which is why it is higher. The disclosure also reports 511,031 kWh of electricity, 10,433 therms of natural gas and 8,663 thousand gallons of water for the year.

Which law requires Park Pleasant Apartments - (pr432) to report its energy use?

Park Pleasant Apartments - (pr432) reports under the Clean and Affordable Energy Act / BEPS, the legal basis of Washington, DC's Building Energy Benchmarking program, which publishes each covered building's annual benchmarking results. The record shown here is the report-year 2024 disclosure (source record dc:PM4006775:2024). DC's Building Energy Performance Standards (BEPS) require buildings below the performance standard to improve over compliance cycles (the first ends December 31, 2026; later cycles run five years), with penalties for buildings that fail to meet their pathway.