BuildingCensus
D

Washington View Assoc2

Multifamily Housing in Washington, DC, DC · 2657-61 Stanton Rd SE · 20020

At a glance

Washington View Assoc2 is a 88,082-square-foot multifamily housing building at 2657-61 Stanton Rd SE in Washington, DC, built in 1967. In its 2018 Washington, DC benchmarking disclosure it reported an ENERGY STAR score of 39 out of 100 (grade D), a site energy-use intensity of 50.1 kBtu/ft² and 333 tCO₂e of greenhouse-gas emissions. That score is higher than 12% of the 1,618 scored multifamily housing buildings in Washington, DC.

ENERGY STAR score
39
band D · 2018
Site EUI
50.1
kBtu/ft²
GHG emissions
333
tCO₂e
GHG intensity
3.8
kgCO₂e/ft²
Floor area
88,082
sq ft
Year built
1967
vintage
◆ Loading map…
85–10070–8455–691–54
This entry + 6 nearby

Clean and Affordable Energy Act / BEPS · reporting year 2018

Benchmarking record

FieldValue
ENERGY STAR score39 (band D)
Site EUI50.1 kBtu/ft²
Source EUI98.7 kBtu/ft²
GHG emissions333 tCO₂e
GHG intensity3.8 kgCO₂e/ft²
Electricity680,783 kWh
Natural gas20,886 therms
Water use3,505 kgal
Gross floor area88,082 sq ft
Source recorddc:PM4007393:2018

The disclosure history

Year over year

YearScoreΔSite EUIGHG emissions
2018latest39-350.1 kBtu/ft²333 tCO₂e
201742-1142.2 kBtu/ft²326 tCO₂e
201653±042.1 kBtu/ft²333 tCO₂e
201553-4742.5 kBtu/ft²376 tCO₂e
201410022.2 kBtu/ft²121 tCO₂e
2013—18.6 kBtu/ft²205 tCO₂e

Compliance context

Clean and Affordable Energy Act / BEPS

DC's Building Energy Performance Standards (BEPS) require buildings below the performance standard to improve over compliance cycles (the first ends December 31, 2026; later cycles run five years), with penalties for buildings that fail to meet their pathway.

Program details →

Ownership

WASHINGTON VIEW ASSOCIATES LLC

Own or manage this building? Claim it to correct the record and get compliance alerts.

Location

Address
2657-61 Stanton Rd SE
State
District of Columbia
ZIP
20020
Coordinates
38.85826, -76.99045

Within ~1 km

Nearby benchmarked buildings

See also: most efficient in Washington, DC · biggest emitters

How does Washington View Assoc2 compare with other multifamily housing buildings in Washington, DC?

The latest disclosures cover 1,799 multifamily housing buildings in Washington, DC, out of 6,870 buildings citywide. Washington View Assoc2's ENERGY STAR score of 39 compares with an average of 72 across the 1,618 that report a score; it scores higher than 12% of them and lower than 88%. Its site EUI of 50.1 kBtu/ft² is roughly in line with the average of 51.1 kBtu/ft² — it uses less energy per square foot than the typical building in that group. Its emissions intensity of 3.8 kgCO₂e/ft² is roughly in line with the group average of 3.8 kgCO₂e/ft².

At 88,082 sq ft, it is about 35% below the average floor area of 136,346 sq ft for those buildings. Its 1967 construction date is close to the group's average year built (1965). Across all 24 jurisdictions BuildingCensus covers, the 59,945 multifamily housing buildings average an ENERGY STAR score of 70 and a site EUI of 59.0 kBtu/ft².

How has Washington View Assoc2's energy performance changed over time?

BuildingCensus holds 6 Washington, DC disclosures for Washington View Assoc2, covering report years 2013–2018. Its ENERGY STAR score went from 100 in 2014 to 39 in 2018 (-61 points); its best year on file was 2014, at 100. Site EUI moved from 18.6 kBtu/ft² (2013) to 50.1 kBtu/ft² (2018), an 169% increase. Reported emissions went from 205 tCO₂e to 333 tCO₂e over the same span (up 62%).

What does an ENERGY STAR score of 39 mean?

ENERGY STAR scores run from 1 to 100 and are computed by the EPA's Portfolio Manager as a percentile against similar buildings nationwide, adjusted for climate, size and use: a score of 39 means the building performs better than about 39% of its national peers. BuildingCensus bands the score into report-card grades; 39 falls in band D — lowest band (1–54). It sits 36 points below 75, the threshold for ENERGY STAR certification. In Washington, DC, 47% of scored buildings are at 75 or above.

Site energy-use intensity (EUI) is the energy a building uses on site in a year divided by its floor area, in thousand Btu per square foot — lower is more efficient. Washington View Assoc2's 50.1 kBtu/ft² across 88,082 sq ft works out to about 4.4 billion Btu (1,293 MWh-equivalent) in 2018. Its source EUI of 98.7 kBtu/ft² also counts the energy lost generating and delivering that power, which is why it is higher. The disclosure also reports 680,783 kWh of electricity, 20,886 therms of natural gas and 3,505 thousand gallons of water for the year.

Which law requires Washington View Assoc2 to report its energy use?

Washington View Assoc2 reports under the Clean and Affordable Energy Act / BEPS, the legal basis of Washington, DC's Building Energy Benchmarking program, which publishes each covered building's annual benchmarking results. The record shown here is the report-year 2018 disclosure (source record dc:PM4007393:2018). DC's Building Energy Performance Standards (BEPS) require buildings below the performance standard to improve over compliance cycles (the first ends December 31, 2026; later cycles run five years), with penalties for buildings that fail to meet their pathway.

More multifamily housing buildings in Washington, DC

Frequently asked questions

What is Washington View Assoc2's energy grade?

Washington View Assoc2 scores 39 out of 100 on ENERGY STAR — band D, lowest band (1–54) — in its 2018 Washington, DC disclosure. Scores are national percentiles against similar buildings; 75+ qualifies for ENERGY STAR certification.

How much energy does Washington View Assoc2 use?

Its 2018 site energy-use intensity was 50.1 kBtu/ft² (98.7 kBtu/ft² source) across 88,082 sq ft, including 680,783 kWh of electricity and 20,886 therms of natural gas.

What are Washington View Assoc2's carbon emissions?

Washington View Assoc2 reported 333 tCO₂e of greenhouse-gas emissions (3.8 kgCO₂e/ft²) for 2018.

Where is Washington View Assoc2?

Washington View Assoc2 is at 2657-61 Stanton Rd SE, in Washington, DC 20020. Its coordinates are 38.85826, -76.99045 (latitude, longitude), as published in the Building Energy Benchmarking file.

How big is Washington View Assoc2 and when was it built?

Washington View Assoc2 has 88,082 sq ft of gross floor area, as reported in its 2018 disclosure. The disclosure lists 1967 as its year built. It is classed as multifamily housing.

Is Washington View Assoc2 covered by the Clean and Affordable Energy Act / BEPS?

Yes — it appears in the 2018 Building Energy Benchmarking disclosure, which lists the buildings reporting under the Clean and Affordable Energy Act / BEPS.

Working with Washington, DC building benchmarking records? Pro adds alerts, change history and CSV export ($49/mo); Enterprise adds full national files, the API and an MCP server for AI tools.

About this data

Source: Building Energy Benchmarking (Clean and Affordable Energy Act / BEPS), as published July 9, 2026. See the methodology for how records are matched, cleaned and scored.

Cite as: BuildingCensus, “Washington View Assoc2, Washington, DC — 2018 benchmarking disclosure”, https://buildingcensus.com/buildings/washington-dc/washington-view-assoc2-3aa84b06 (data as of July 9, 2026).