BuildingCensus
D

10112 Ashwood St

Multifamily Housing in California, CA · 10112 Ashwood St, Lakeside┬Á · 92040

At a glance

10112 Ashwood St is a 56,704-square-foot multifamily housing building at 10112 Ashwood St, Lakeside┬Á in Lakeside┬Á, California, built in 1980. In its 2024 California benchmarking disclosure it reported an ENERGY STAR score of 32 out of 100 (grade D), a site energy-use intensity of 49.4 kBtu/ft² and 170 tCO₂e of greenhouse-gas emissions. That score is higher than 5% of the 9,612 scored multifamily housing buildings in California.

ENERGY STAR score
32
band D · 2024
Site EUI
49.4
kBtu/ft²
GHG emissions
170
tCO₂e
GHG intensity
3.0
kgCO₂e/ft²
Floor area
56,704
sq ft
Year built
1980
vintage
◆ Loading map…
85–10070–8455–691–54
This entry + 6 nearby

AB 802 (Public Resources Code §25402.10) · reporting year 2024

Benchmarking record

FieldValue
ENERGY STAR score32 (band D)
Site EUI49.4 kBtu/ft²
Source EUI—
GHG emissions170 tCO₂e
GHG intensity3.0 kgCO₂e/ft²
Electricity357,197 kWh
Natural gas16,708 therms
Gross floor area56,704 sq ft
Source recordcalifornia:12425059:2024

The disclosure history

Year over year

YearScoreΔSite EUIGHG emissions
2024latest32-4849.4 kBtu/ft²170 tCO₂e
202380+2439.4 kBtu/ft²135 tCO₂e
202056-243.4 kBtu/ft²147 tCO₂e
20195844.5 kBtu/ft²148 tCO₂e

Compliance context

AB 802 (Public Resources Code §25402.10)

AB 802 requires every California commercial building over 50,000 sq ft to report energy use to the CEC annually; the CEC publicly discloses the results statewide.

Program details →

Ownership

No owning organisation shown. Names of private individuals in the disclosure are not published here.

Own or manage this building? Claim it to correct the record and get compliance alerts.

Location

Address
10112 Ashwood St, Lakeside┬Á
State
California
ZIP
92040
Coordinates
32.86267, -116.91786

Within ~1 km

Nearby benchmarked buildings

See also: most efficient in California · biggest emitters

How does 10112 Ashwood St compare with other multifamily housing buildings in California?

The latest disclosures cover 10,630 multifamily housing buildings in California, out of 40,029 buildings citywide. 10112 Ashwood St's ENERGY STAR score of 32 compares with an average of 82 across the 9,612 that report a score; it scores higher than 5% of them and lower than 94%. Its site EUI of 49.4 kBtu/ft² is about 44% above the average of 34.4 kBtu/ft² — it uses more energy per square foot than the typical building in that group. Its emissions intensity of 3.0 kgCO₂e/ft² is about 42% above the group average of 2.1 kgCO₂e/ft².

At 56,704 sq ft, it is about 62% below the average floor area of 150,919 sq ft for those buildings. It was built in 1980, 8 years earlier than the group's average year built (1988). Across all 24 jurisdictions BuildingCensus covers, the 59,945 multifamily housing buildings average an ENERGY STAR score of 70 and a site EUI of 59.0 kBtu/ft².

How has 10112 Ashwood St's energy performance changed over time?

BuildingCensus holds 4 California disclosures for 10112 Ashwood St, covering report years 2019, 2020, 2023, 2024. Its ENERGY STAR score went from 58 in 2019 to 32 in 2024 (-26 points); its best year on file was 2023, at 80. Site EUI moved from 44.5 kBtu/ft² (2019) to 49.4 kBtu/ft² (2024), an 11% increase. Reported emissions went from 148 tCO₂e to 170 tCO₂e over the same span (up 15%).

What does an ENERGY STAR score of 32 mean?

ENERGY STAR scores run from 1 to 100 and are computed by the EPA's Portfolio Manager as a percentile against similar buildings nationwide, adjusted for climate, size and use: a score of 32 means the building performs better than about 32% of its national peers. BuildingCensus bands the score into report-card grades; 32 falls in band D — lowest band (1–54). It sits 43 points below 75, the threshold for ENERGY STAR certification. In California, 65% of scored buildings are at 75 or above.

Site energy-use intensity (EUI) is the energy a building uses on site in a year divided by its floor area, in thousand Btu per square foot — lower is more efficient. 10112 Ashwood St's 49.4 kBtu/ft² across 56,704 sq ft works out to about 2.8 billion Btu (821 MWh-equivalent) in 2024. The disclosure also reports 357,197 kWh of electricity and 16,708 therms of natural gas for the year.

Which law requires 10112 Ashwood St to report its energy use?

10112 Ashwood St reports under AB 802 (Public Resources Code §25402.10), the legal basis of California's Building Energy Benchmarking Program (statewide), which publishes each covered building's annual benchmarking results. The record shown here is the report-year 2024 disclosure (source record california:12425059:2024). AB 802 requires every California commercial building over 50,000 sq ft to report energy use to the CEC annually; the CEC publicly discloses the results statewide.

More multifamily housing buildings in California

Frequently asked questions

What is 10112 Ashwood St's energy grade?

10112 Ashwood St scores 32 out of 100 on ENERGY STAR — band D, lowest band (1–54) — in its 2024 California disclosure. Scores are national percentiles against similar buildings; 75+ qualifies for ENERGY STAR certification.

How much energy does 10112 Ashwood St use?

Its 2024 site energy-use intensity was 49.4 kBtu/ft² across 56,704 sq ft, including 357,197 kWh of electricity and 16,708 therms of natural gas.

What are 10112 Ashwood St's carbon emissions?

10112 Ashwood St reported 170 tCO₂e of greenhouse-gas emissions (3.0 kgCO₂e/ft²) for 2024.

Where is 10112 Ashwood St?

10112 Ashwood St is at 10112 Ashwood St, Lakeside┬Á, in Lakeside┬Á, California 92040. Its coordinates are 32.86267, -116.91786 (latitude, longitude), as published in the Building Energy Benchmarking Program (statewide) file.

How big is 10112 Ashwood St and when was it built?

10112 Ashwood St has 56,704 sq ft of gross floor area, as reported in its 2024 disclosure. The disclosure lists 1980 as its year built. It is classed as multifamily housing.

Is 10112 Ashwood St covered by AB 802 (Public Resources Code §25402.10)?

Yes — it appears in the 2024 Building Energy Benchmarking Program (statewide) disclosure, which lists the buildings reporting under AB 802 (Public Resources Code §25402.10).

Working with California building benchmarking records? Pro adds alerts, change history and CSV export ($49/mo); Enterprise adds full national files, the API and an MCP server for AI tools.

About this data

Source: Building Energy Benchmarking Program (statewide) (AB 802 (Public Resources Code §25402.10)), as published July 9, 2026. See the methodology for how records are matched, cleaned and scored.

Cite as: BuildingCensus, “10112 Ashwood St, Lakeside┬Á, California — 2024 benchmarking disclosure”, https://buildingcensus.com/buildings/california/10112-ashwood-st-47b68fde (data as of July 9, 2026).