BuildingCensus
B

Alcott and Bryant

Multifamily Housing in Chicago, IL · 1455-1460 North Sandburg · 60610

At a glance

Alcott and Bryant is a 779,012-square-foot multifamily housing building at 1455-1460 North Sandburg in Chicago, Illinois, built in 1962. In its 2023 Chicago benchmarking disclosure it reported an ENERGY STAR score of 72 out of 100 (grade B), a site energy-use intensity of 66.2 kBtu/ft² and 3,727 tCO₂e of greenhouse-gas emissions. That score is higher than 56% of the 1,472 scored multifamily housing buildings in Chicago.

ENERGY STAR score
72
band B · 2023
Site EUI
66.2
kBtu/ft²
GHG emissions
3,727
tCO₂e
GHG intensity
4.8
kgCO₂e/ft²
Floor area
779,012
sq ft
Year built
1962
vintage
◆ Loading map…
85–10070–8455–691–54
This entry + 6 nearby

Building Energy Use Benchmarking Ordinance · reporting year 2023

Benchmarking record

FieldValue
ENERGY STAR score72 (band B)
Site EUI66.2 kBtu/ft²
Source EUI95.1 kBtu/ft²
GHG emissions3,727 tCO₂e
GHG intensity4.8 kgCO₂e/ft²
Electricity3,337,336 kWh
Natural gas401,754 therms
Gross floor area779,012 sq ft
Source recordchicago:242901:2023

The disclosure history

Year over year

YearScoreΔSite EUIGHG emissions
2023latest72-2266.2 kBtu/ft²3,727 tCO₂e
20229465.7 kBtu/ft²3,205 tCO₂e
2021———
202091+264.2 kBtu/ft²3,417 tCO₂e
201989±069.7 kBtu/ft²—
201889+3870.3 kBtu/ft²3,753 tCO₂e
201751-49102.9 kBtu/ft²3,492 tCO₂e
201610018.0 kBtu/ft²1,485 tCO₂e

Compliance context

Building Energy Use Benchmarking Ordinance

Covered buildings that fail to benchmark and report face fines of up to $100 plus $25 per day of violation under the ordinance.

Program details →

Ownership

No owning organisation shown. Names of private individuals in the disclosure are not published here.

Own or manage this building? Claim it to correct the record and get compliance alerts.

Location

Address
1455-1460 North Sandburg
State
Illinois
ZIP
60610
Coordinates
41.88521, -87.64700

Within ~1 km

Nearby benchmarked buildings

See also: most efficient in Chicago · biggest emitters

How does Alcott and Bryant compare with other multifamily housing buildings in Chicago?

The latest disclosures cover 1,515 multifamily housing buildings in Chicago, out of 3,852 buildings citywide. Alcott and Bryant's ENERGY STAR score of 72 compares with an average of 62 across the 1,472 that report a score; it scores higher than 56% of them and lower than 43%. Its site EUI of 66.2 kBtu/ft² is roughly in line with the average of 72.0 kBtu/ft² — it uses less energy per square foot than the typical building in that group. Its emissions intensity of 4.8 kgCO₂e/ft² is about 17% below the group average of 5.8 kgCO₂e/ft².

At 779,012 sq ft, it is about 278% above the average floor area of 206,097 sq ft for those buildings. It was built in 1962, 9 years earlier than the group's average year built (1971). Across all 24 jurisdictions BuildingCensus covers, the 59,945 multifamily housing buildings average an ENERGY STAR score of 70 and a site EUI of 59.0 kBtu/ft².

How has Alcott and Bryant's energy performance changed over time?

BuildingCensus holds 8 Chicago disclosures for Alcott and Bryant, covering report years 2016–2023. Its ENERGY STAR score went from 100 in 2016 to 72 in 2023 (-28 points); its best year on file was 2016, at 100. Site EUI moved from 18.0 kBtu/ft² (2016) to 66.2 kBtu/ft² (2023), an 268% increase. Reported emissions went from 1,485 tCO₂e to 3,727 tCO₂e over the same span (up 151%).

What does an ENERGY STAR score of 72 mean?

ENERGY STAR scores run from 1 to 100 and are computed by the EPA's Portfolio Manager as a percentile against similar buildings nationwide, adjusted for climate, size and use: a score of 72 means the building performs better than about 72% of its national peers. BuildingCensus bands the score into report-card grades; 72 falls in band B — above median (70–84). It sits 3 points below 75, the threshold for ENERGY STAR certification. In Chicago, 35% of scored buildings are at 75 or above.

Site energy-use intensity (EUI) is the energy a building uses on site in a year divided by its floor area, in thousand Btu per square foot — lower is more efficient. Alcott and Bryant's 66.2 kBtu/ft² across 779,012 sq ft works out to about 51.6 billion Btu (15,114 MWh-equivalent) in 2023. Its source EUI of 95.1 kBtu/ft² also counts the energy lost generating and delivering that power, which is why it is higher. The disclosure also reports 3,337,336 kWh of electricity and 401,754 therms of natural gas for the year.

Which law requires Alcott and Bryant to report its energy use?

Alcott and Bryant reports under the Building Energy Use Benchmarking Ordinance, the legal basis of the Chicago Energy Benchmarking program, which publishes each covered building's annual benchmarking results. The record shown here is the report-year 2023 disclosure (source record chicago:242901:2023). Covered buildings that fail to benchmark and report face fines of up to $100 plus $25 per day of violation under the ordinance.

More multifamily housing buildings in Chicago

Frequently asked questions

What is Alcott and Bryant's energy grade?

Alcott and Bryant scores 72 out of 100 on ENERGY STAR — band B, above median (70–84) — in its 2023 Chicago disclosure. Scores are national percentiles against similar buildings; 75+ qualifies for ENERGY STAR certification.

How much energy does Alcott and Bryant use?

Its 2023 site energy-use intensity was 66.2 kBtu/ft² (95.1 kBtu/ft² source) across 779,012 sq ft, including 3,337,336 kWh of electricity and 401,754 therms of natural gas.

What are Alcott and Bryant's carbon emissions?

Alcott and Bryant reported 3,727 tCO₂e of greenhouse-gas emissions (4.8 kgCO₂e/ft²) for 2023.

Where is Alcott and Bryant?

Alcott and Bryant is at 1455-1460 North Sandburg, in Chicago, Illinois 60610. Its coordinates are 41.88521, -87.64700 (latitude, longitude), as published in the Chicago Energy Benchmarking file.

How big is Alcott and Bryant and when was it built?

Alcott and Bryant has 779,012 sq ft of gross floor area, as reported in its 2023 disclosure. The disclosure lists 1962 as its year built. It is classed as multifamily housing.

Is Alcott and Bryant covered by the Building Energy Use Benchmarking Ordinance?

Yes — it appears in the 2023 Chicago Energy Benchmarking disclosure, which lists the buildings reporting under the Building Energy Use Benchmarking Ordinance.

Working with Chicago building benchmarking records? Pro adds alerts, change history and CSV export ($49/mo); Enterprise adds full national files, the API and an MCP server for AI tools.

About this data

Source: Chicago Energy Benchmarking (Building Energy Use Benchmarking Ordinance), as published October 2, 2026. See the methodology for how records are matched, cleaned and scored.

Cite as: BuildingCensus, “Alcott and Bryant, Chicago, Illinois — 2023 benchmarking disclosure”, https://buildingcensus.com/buildings/chicago/alcott-and-bryant-bbd4369f (data as of October 2, 2026).