BuildingCensus
A

Chamberlin Heights

Multifamily Housing in Denver, CO · 1489 Steele St · 80206

At a glance

Chamberlin Heights is a 82,900-square-foot multifamily housing building at 1489 Steele St in Denver, Colorado, built in 2002. In its 2023 Denver benchmarking disclosure it reported an ENERGY STAR score of 88 out of 100 (grade A), a site energy-use intensity of 46.4 kBtu/ft² and 355 tCO₂e of greenhouse-gas emissions. That score is higher than 54% of the 956 scored multifamily housing buildings in Denver.

ENERGY STAR score
88
band A · 2023
Site EUI
46.4
kBtu/ft²
GHG emissions
355
tCO₂e
GHG intensity
—
kgCO₂e/ft²
Floor area
82,900
sq ft
Year built
2002
vintage

Energize Denver Building Performance Policy · reporting year 2023

Benchmarking record

FieldValue
ENERGY STAR score88 (band A)
Site EUI46.4 kBtu/ft²
Source EUI—
GHG emissions355 tCO₂e
GHG intensity—
Electricity434,986 kWh
Natural gas23,592 therms
Gross floor area82,900 sq ft
Source recorddenver:2867:2023

The disclosure history

Year over year

YearScoreΔSite EUIGHG emissions
2023latest88-1246.4 kBtu/ft²355 tCO₂e
2022100+55.0 kBtu/ft²60 tCO₂e
20219548.8 kBtu/ft²380 tCO₂e

Compliance context

Energize Denver Building Performance Policy

Energize Denver sets energy-use (EUI) targets for buildings of 25,000+ sq ft — for most buildings an interim target in 2028 and a final target in 2032 — with civil penalties of roughly $0.15–0.35 per kBtu over target for non-compliance.

Program details →

Ownership

No owning organisation shown. Names of private individuals in the disclosure are not published here.

Own or manage this building? Claim it to correct the record and get compliance alerts.

Location

Address
1489 Steele St
City
Denver
State
Colorado
ZIP
80206

Within ~1 km

Nearby benchmarked buildings

This source publishes no coordinates, so nearby buildings can't be resolved yet.

See also: most efficient in Denver · biggest emitters

How does Chamberlin Heights compare with other multifamily housing buildings in Denver?

The latest disclosures cover 1,108 multifamily housing buildings in Denver, out of 3,287 buildings citywide. Chamberlin Heights's ENERGY STAR score of 88 compares with an average of 78 across the 956 that report a score; it scores higher than 54% of them and lower than 42%. Its site EUI of 46.4 kBtu/ft² is about 19% below the average of 57.0 kBtu/ft² — it uses less energy per square foot than the typical building in that group.

At 82,900 sq ft, it is about 34% below the average floor area of 126,139 sq ft for those buildings. It was built in 2002, 12 years later than the group's average year built (1990). Across all 24 jurisdictions BuildingCensus covers, the 59,945 multifamily housing buildings average an ENERGY STAR score of 70 and a site EUI of 59.0 kBtu/ft².

How has Chamberlin Heights's energy performance changed over time?

BuildingCensus holds 3 Denver disclosures for Chamberlin Heights, covering report years 2021–2023. Its ENERGY STAR score went from 95 in 2021 to 88 in 2023 (-7 points); its best year on file was 2022, at 100. Site EUI moved from 48.8 kBtu/ft² (2021) to 46.4 kBtu/ft² (2023), a 5% decrease. Reported emissions went from 380 tCO₂e to 355 tCO₂e over the same span (down 7%).

What does an ENERGY STAR score of 88 mean?

ENERGY STAR scores run from 1 to 100 and are computed by the EPA's Portfolio Manager as a percentile against similar buildings nationwide, adjusted for climate, size and use: a score of 88 means the building performs better than about 88% of its national peers. BuildingCensus bands the score into report-card grades; 88 falls in band A — high performer (85–100). Scores of 75 or higher meet the threshold for ENERGY STAR certification; certification itself is a separate, verified application that the disclosure does not record. In Denver, 54% of scored buildings are at 75 or above.

Site energy-use intensity (EUI) is the energy a building uses on site in a year divided by its floor area, in thousand Btu per square foot — lower is more efficient. Chamberlin Heights's 46.4 kBtu/ft² across 82,900 sq ft works out to about 3.8 billion Btu (1,127 MWh-equivalent) in 2023. The disclosure also reports 434,986 kWh of electricity and 23,592 therms of natural gas for the year.

Which law requires Chamberlin Heights to report its energy use?

Chamberlin Heights reports under the Energize Denver Building Performance Policy, the legal basis of Denver's Energize Denver Benchmarking program, which publishes each covered building's annual benchmarking results. The record shown here is the report-year 2023 disclosure (source record denver:2867:2023). Energize Denver sets energy-use (EUI) targets for buildings of 25,000+ sq ft — for most buildings an interim target in 2028 and a final target in 2032 — with civil penalties of roughly $0.15–0.35 per kBtu over target for non-compliance.

More multifamily housing buildings in Denver

Frequently asked questions

What is Chamberlin Heights's energy grade?

Chamberlin Heights scores 88 out of 100 on ENERGY STAR — band A, high performer (85–100) — in its 2023 Denver disclosure. Scores are national percentiles against similar buildings; 75+ qualifies for ENERGY STAR certification.

How much energy does Chamberlin Heights use?

Its 2023 site energy-use intensity was 46.4 kBtu/ft² across 82,900 sq ft, including 434,986 kWh of electricity and 23,592 therms of natural gas.

What are Chamberlin Heights's carbon emissions?

Chamberlin Heights reported 355 tCO₂e of greenhouse-gas emissions for 2023.

Where is Chamberlin Heights?

Chamberlin Heights is at 1489 Steele St, in Denver, Colorado 80206.

How big is Chamberlin Heights and when was it built?

Chamberlin Heights has 82,900 sq ft of gross floor area, as reported in its 2023 disclosure. The disclosure lists 2002 as its year built. It is classed as multifamily housing.

Is Chamberlin Heights covered by the Energize Denver Building Performance Policy?

Yes — it appears in the 2023 Energize Denver Benchmarking disclosure, which lists the buildings reporting under the Energize Denver Building Performance Policy.

Working with Denver building benchmarking records? Pro adds alerts, change history and CSV export ($49/mo); Enterprise adds full national files, the API and an MCP server for AI tools.

About this data

Source: Energize Denver Benchmarking (Energize Denver Building Performance Policy), as published July 9, 2026. See the methodology for how records are matched, cleaned and scored.

Cite as: BuildingCensus, “Chamberlin Heights, Denver, Colorado — 2023 benchmarking disclosure”, https://buildingcensus.com/buildings/denver/chamberlin-heights-87019c16 (data as of July 9, 2026).