BuildingCensus
–

Metro Pike

Strip Mall in Montgomery County, MD · 11510 - 11564 Rockville Pike · 20852

At a glance

Metro Pike is a 69,600-square-foot strip mall building at 11510 - 11564 Rockville Pike in Montgomery County, Maryland, built in 1989. In its 2024 Montgomery County benchmarking disclosure it reported a site energy-use intensity of 70.5 kBtu/ft² and 339 tCO₂e of greenhouse-gas emissions.

ENERGY STAR score
—
not reported · 2024
Site EUI
70.5
kBtu/ft²
GHG emissions
339
tCO₂e
GHG intensity
—
kgCO₂e/ft²
Floor area
69,600
sq ft
Year built
1989
vintage

Benchmarking Law (Bill 2-14) / BEPS (Bill 16-21) · reporting year 2024

Benchmarking record

FieldValue
ENERGY STAR score—
Site EUI70.5 kBtu/ft²
Source EUI130.8 kBtu/ft²
GHG emissions339 tCO₂e
GHG intensity—
Electricity662,587 kWh
Natural gas26,445 therms
Gross floor area69,600 sq ft
Source recordmontgomery_county:6160012:2024

The disclosure history

Year over year

YearScoreΔSite EUIGHG emissions
2024latest—70.5 kBtu/ft²339 tCO₂e
2023—65.5 kBtu/ft²326 tCO₂e

Compliance context

Benchmarking Law (Bill 2-14) / BEPS (Bill 16-21)

Montgomery County's BEPS (Bill 16-21; regulations approved in 2025) sets declining site-EUI standards for buildings of 25,000+ sq ft, with interim and then final standards later this decade and into the 2030s depending on building type.

Program details →

Ownership

No owning organisation shown. Names of private individuals in the disclosure are not published here.

Own or manage this building? Claim it to correct the record and get compliance alerts.

Location

Address
11510 - 11564 Rockville Pike
State
Maryland
ZIP
20852

Within ~1 km

Nearby benchmarked buildings

This source publishes no coordinates, so nearby buildings can't be resolved yet.

See also: most efficient in Montgomery County · biggest emitters

How does Metro Pike compare with other strip mall buildings in Montgomery County?

The latest disclosures cover 33 strip mall buildings in Montgomery County, out of 1,766 buildings citywide. Its site EUI of 70.5 kBtu/ft² is about 19% below the average of 87.5 kBtu/ft² — it uses less energy per square foot than the typical building in that group.

At 69,600 sq ft, it is about 39% below the average floor area of 113,735 sq ft for those buildings. It was built in 1989, 7 years later than the group's average year built (1983). Across all 24 jurisdictions BuildingCensus covers, the 1,607 strip mall buildings average an ENERGY STAR score of 68 and a site EUI of 83.1 kBtu/ft².

How has Metro Pike's energy performance changed over time?

BuildingCensus holds 2 Montgomery County disclosures for Metro Pike, covering report years 2023–2024. Site EUI moved from 65.5 kBtu/ft² (2023) to 70.5 kBtu/ft² (2024), an 8% increase. Reported emissions went from 326 tCO₂e to 339 tCO₂e over the same span (up 4%).

What does a site EUI of 70.5 kBtu/ft² mean?

Site energy-use intensity (EUI) is the energy a building uses on site in a year divided by its floor area, in thousand Btu per square foot — lower is more efficient. Metro Pike's 70.5 kBtu/ft² across 69,600 sq ft works out to about 4.9 billion Btu (1,438 MWh-equivalent) in 2024. Its source EUI of 130.8 kBtu/ft² also counts the energy lost generating and delivering that power, which is why it is higher. The disclosure also reports 662,587 kWh of electricity and 26,445 therms of natural gas for the year.

Which law requires Metro Pike to report its energy use?

Metro Pike reports under the Benchmarking Law (Bill 2-14) / BEPS (Bill 16-21), the legal basis of Montgomery County's Commercial Building Energy Benchmarking program, which publishes each covered building's annual benchmarking results. The record shown here is the report-year 2024 disclosure (source record montgomery_county:6160012:2024). Montgomery County's BEPS (Bill 16-21; regulations approved in 2025) sets declining site-EUI standards for buildings of 25,000+ sq ft, with interim and then final standards later this decade and into the 2030s depending on building type.

More strip mall buildings in Montgomery County

Frequently asked questions

What is Metro Pike's energy grade?

Metro Pike did not report an ENERGY STAR score in its 2024 disclosure, but its site energy-use intensity was 70.5 kBtu/ft².

How much energy does Metro Pike use?

Its 2024 site energy-use intensity was 70.5 kBtu/ft² (130.8 kBtu/ft² source) across 69,600 sq ft, including 662,587 kWh of electricity and 26,445 therms of natural gas.

What are Metro Pike's carbon emissions?

Metro Pike reported 339 tCO₂e of greenhouse-gas emissions for 2024.

Where is Metro Pike?

Metro Pike is at 11510 - 11564 Rockville Pike, in Montgomery County, Maryland 20852.

How big is Metro Pike and when was it built?

Metro Pike has 69,600 sq ft of gross floor area, as reported in its 2024 disclosure. The disclosure lists 1989 as its year built. It is classed as strip mall.

Is Metro Pike covered by the Benchmarking Law (Bill 2-14) / BEPS (Bill 16-21)?

Yes — it appears in the 2024 Commercial Building Energy Benchmarking disclosure, which lists the buildings reporting under the Benchmarking Law (Bill 2-14) / BEPS (Bill 16-21).

Working with Montgomery County building benchmarking records? Pro adds alerts, change history and CSV export ($49/mo); Enterprise adds full national files, the API and an MCP server for AI tools.

About this data

Source: Commercial Building Energy Benchmarking (Benchmarking Law (Bill 2-14) / BEPS (Bill 16-21)), as published October 2, 2026. See the methodology for how records are matched, cleaned and scored.

Cite as: BuildingCensus, “Metro Pike, Montgomery County, Maryland — 2024 benchmarking disclosure”, https://buildingcensus.com/buildings/montgomery-county/metro-pike-31879f65 (data as of October 2, 2026).