2750 HYDE ST

How does 2750 HYDE ST compare with other commercial buildings in San Francisco?

The latest disclosures cover 1,683 commercial buildings in San Francisco, out of 2,509 buildings citywide. 2750 HYDE ST's ENERGY STAR score of 56 compares with an average of 78 across the 790 that report a score; it scores higher than 14% of them and lower than 85%. Its site EUI of 71.5 kBtu/ft² is about 45% above the average of 49.2 kBtu/ft² — it uses more energy per square foot than the typical building in that group. Its emissions intensity of 4.0 kgCO₂e/ft² is about 47% above the group average of 2.7 kgCO₂e/ft².

At 131,194 sq ft, it is about 22% above the average floor area of 107,408 sq ft for those buildings. It was built in 1973, 32 years later than the group's average year built (1941). Across all 24 jurisdictions BuildingCensus covers, the 2,307 commercial buildings average an ENERGY STAR score of 76 and a site EUI of 51.3 kBtu/ft².

How has 2750 HYDE ST's energy performance changed over time?

BuildingCensus holds 15 San Francisco disclosures for 2750 HYDE ST, covering report years 2011–2025. Its ENERGY STAR score went from 78 in 2013 to 56 in 2025 (-22 points); its best year on file was 2013, at 78. Site EUI moved from 78.9 kBtu/ft² (2013) to 71.5 kBtu/ft² (2025), a 9% decrease. Reported emissions went from 390 tCO₂e to 327 tCO₂e over the same span (down 16%).

What does an ENERGY STAR score of 56 mean?

ENERGY STAR scores run from 1 to 100 and are computed by the EPA's Portfolio Manager as a percentile against similar buildings nationwide, adjusted for climate, size and use: a score of 56 means the building performs better than about 56% of its national peers. BuildingCensus bands the score into report-card grades; 56 falls in band C — below median (55–69). It sits 19 points below 75, the threshold for ENERGY STAR certification. In San Francisco, 73% of scored buildings are at 75 or above.

Site energy-use intensity (EUI) is the energy a building uses on site in a year divided by its floor area, in thousand Btu per square foot — lower is more efficient. 2750 HYDE ST's 71.5 kBtu/ft² across 131,194 sq ft works out to about 9.4 billion Btu (2,749 MWh-equivalent) in 2025. Its source EUI of 147.1 kBtu/ft² also counts the energy lost generating and delivering that power, which is why it is higher. The disclosure also reports 994,657 kWh of electricity and 24,970 therms of natural gas for the year.

Which law requires 2750 HYDE ST to report its energy use?

2750 HYDE ST reports under SF Environment Code Chapter 20, the legal basis of San Francisco's Existing Buildings Energy Performance Ordinance, which publishes each covered building's annual benchmarking results. The record shown here is the report-year 2025 disclosure (source record sf:0024/025:2025). San Francisco's ordinance requires annual benchmarking for commercial buildings over 10,000 sq ft, with administrative penalties for buildings that fail to report.