1803 Riverside Drive

How does 1803 Riverside Drive compare with other multifamily housing buildings in New York City?

The latest disclosures cover 33,022 multifamily housing buildings in New York City, out of 48,310 buildings citywide. 1803 Riverside Drive's ENERGY STAR score of 77 compares with an average of 63 across the 22,829 that report a score; it scores higher than 60% of them and lower than 39%. Its site EUI of 74.3 kBtu/ft² is roughly in line with the average of 74.9 kBtu/ft² — it uses less energy per square foot than the typical building in that group. Its emissions intensity of 4.7 kgCO₂e/ft² is roughly in line with the group average of 5.2 kgCO₂e/ft².

At 86,352 sq ft, it is about 14% below the average floor area of 100,951 sq ft for those buildings. It was built in 1920, 32 years earlier than the group's average year built (1952). Across all 24 jurisdictions BuildingCensus covers, the 59,945 multifamily housing buildings average an ENERGY STAR score of 70 and a site EUI of 59.0 kBtu/ft².

How has 1803 Riverside Drive's energy performance changed over time?

BuildingCensus holds 3 New York City disclosures for 1803 Riverside Drive, covering report years 2022–2024. Its ENERGY STAR score went from 92 in 2022 to 77 in 2024 (-15 points); its best year on file was 2022, at 92. Site EUI moved from 59.0 kBtu/ft² (2022) to 74.3 kBtu/ft² (2024), an 26% increase. Reported emissions went from 307 tCO₂e to 406 tCO₂e over the same span (up 32%).

What does an ENERGY STAR score of 77 mean?

ENERGY STAR scores run from 1 to 100 and are computed by the EPA's Portfolio Manager as a percentile against similar buildings nationwide, adjusted for climate, size and use: a score of 77 means the building performs better than about 77% of its national peers. BuildingCensus bands the score into report-card grades; 77 falls in band B — above median (70–84). Scores of 75 or higher meet the threshold for ENERGY STAR certification; certification itself is a separate, verified application that the disclosure does not record. In New York City, 43% of scored buildings are at 75 or above.

Site energy-use intensity (EUI) is the energy a building uses on site in a year divided by its floor area, in thousand Btu per square foot — lower is more efficient. 1803 Riverside Drive's 74.3 kBtu/ft² across 86,352 sq ft works out to about 6.4 billion Btu (1,880 MWh-equivalent) in 2024. Its source EUI of 99.4 kBtu/ft² also counts the energy lost generating and delivering that power, which is why it is higher. The disclosure also reports 309,249 kWh of electricity, 53,591 therms of natural gas and 38 thousand gallons of water for the year.

Which law requires 1803 Riverside Drive to report its energy use?

1803 Riverside Drive reports under Local Law 84 (LL84), the legal basis of New York City's Energy and Water Data Disclosure program, which publishes each covered building's annual benchmarking results. The record shown here is the report-year 2024 disclosure (source record nyc:2640734:2024). Under Local Law 97, buildings over 25,000 sq ft face carbon caps with fines of $268 per metric ton of CO₂e over the limit, phasing in from 2024.