Bryant

How does Bryant compare with other multifamily housing buildings in New York City?

The latest disclosures cover 33,022 multifamily housing buildings in New York City, out of 48,310 buildings citywide. Bryant's ENERGY STAR score of 33 compares with an average of 63 across the 22,829 that report a score; it scores higher than 19% of them and lower than 80%. Its site EUI of 95.3 kBtu/ft² is about 27% above the average of 74.9 kBtu/ft² — it uses more energy per square foot than the typical building in that group. Its emissions intensity of 6.1 kgCO₂e/ft² is about 17% above the group average of 5.2 kgCO₂e/ft².

At 37,590 sq ft, it is about 63% below the average floor area of 100,951 sq ft for those buildings. It was built in 1923, 29 years earlier than the group's average year built (1952). Across all 24 jurisdictions BuildingCensus covers, the 59,945 multifamily housing buildings average an ENERGY STAR score of 70 and a site EUI of 59.0 kBtu/ft².

How has Bryant's energy performance changed over time?

BuildingCensus holds 3 New York City disclosures for Bryant, covering report years 2022–2024. Its ENERGY STAR score went from 46 in 2022 to 33 in 2024 (-13 points); its best year on file was 2022, at 46. Site EUI moved from 89.9 kBtu/ft² (2022) to 95.3 kBtu/ft² (2024), an 6% increase. Reported emissions went from 199 tCO₂e to 228 tCO₂e over the same span (up 15%).

What does an ENERGY STAR score of 33 mean?

ENERGY STAR scores run from 1 to 100 and are computed by the EPA's Portfolio Manager as a percentile against similar buildings nationwide, adjusted for climate, size and use: a score of 33 means the building performs better than about 33% of its national peers. BuildingCensus bands the score into report-card grades; 33 falls in band D — lowest band (1–54). It sits 42 points below 75, the threshold for ENERGY STAR certification. In New York City, 43% of scored buildings are at 75 or above.

Site energy-use intensity (EUI) is the energy a building uses on site in a year divided by its floor area, in thousand Btu per square foot — lower is more efficient. Bryant's 95.3 kBtu/ft² across 37,590 sq ft works out to about 3.6 billion Btu (1,050 MWh-equivalent) in 2024. Its source EUI of 128.4 kBtu/ft² also counts the energy lost generating and delivering that power, which is why it is higher. The disclosure also reports 178,658 kWh of electricity, 29,720 therms of natural gas and 3,855 thousand gallons of water for the year.

Which law requires Bryant to report its energy use?

Bryant reports under Local Law 84 (LL84), the legal basis of New York City's Energy and Water Data Disclosure program, which publishes each covered building's annual benchmarking results. The record shown here is the report-year 2024 disclosure (source record nyc:6240690:2024). Under Local Law 97, buildings over 25,000 sq ft face carbon caps with fines of $268 per metric ton of CO₂e over the limit, phasing in from 2024.