Danax Fulton LLC

How does Danax Fulton LLC compare with other multifamily housing buildings in New York City?

The latest disclosures cover 33,022 multifamily housing buildings in New York City, out of 48,310 buildings citywide. Danax Fulton LLC's ENERGY STAR score of 82 compares with an average of 63 across the 22,829 that report a score; it scores higher than 66% of them and lower than 33%. Its site EUI of 48.5 kBtu/ft² is about 35% below the average of 74.9 kBtu/ft² — it uses less energy per square foot than the typical building in that group. Its emissions intensity of 4.7 kgCO₂e/ft² is roughly in line with the group average of 5.2 kgCO₂e/ft².

At 29,249 sq ft, it is about 71% below the average floor area of 100,951 sq ft for those buildings. It was built in 2017, 65 years later than the group's average year built (1952). Across all 24 jurisdictions BuildingCensus covers, the 59,945 multifamily housing buildings average an ENERGY STAR score of 70 and a site EUI of 59.0 kBtu/ft².

How has Danax Fulton LLC's energy performance changed over time?

BuildingCensus holds 2 New York City disclosures for Danax Fulton LLC, covering report years 2022–2023. Its ENERGY STAR score went from 79 in 2022 to 82 in 2023 (+3 points). Site EUI moved from 55.5 kBtu/ft² (2022) to 48.5 kBtu/ft² (2023), a 13% decrease. Reported emissions went from 122 tCO₂e to 136 tCO₂e over the same span (up 12%).

What does an ENERGY STAR score of 82 mean?

ENERGY STAR scores run from 1 to 100 and are computed by the EPA's Portfolio Manager as a percentile against similar buildings nationwide, adjusted for climate, size and use: a score of 82 means the building performs better than about 82% of its national peers. BuildingCensus bands the score into report-card grades; 82 falls in band B — above median (70–84). Scores of 75 or higher meet the threshold for ENERGY STAR certification; certification itself is a separate, verified application that the disclosure does not record. In New York City, 43% of scored buildings are at 75 or above.

Site energy-use intensity (EUI) is the energy a building uses on site in a year divided by its floor area, in thousand Btu per square foot — lower is more efficient. Danax Fulton LLC's 48.5 kBtu/ft² across 29,249 sq ft works out to about 1.4 billion Btu (416 MWh-equivalent) in 2023. Its source EUI of 116.5 kBtu/ft² also counts the energy lost generating and delivering that power, which is why it is higher. The disclosure also reports 320,928 kWh of electricity, 3,242 therms of natural gas and 768 thousand gallons of water for the year.

Which law requires Danax Fulton LLC to report its energy use?

Danax Fulton LLC reports under Local Law 84 (LL84), the legal basis of New York City's Energy and Water Data Disclosure program, which publishes each covered building's annual benchmarking results. The record shown here is the report-year 2023 disclosure (source record nyc:6682775:2023). Under Local Law 97, buildings over 25,000 sq ft face carbon caps with fines of $268 per metric ton of CO₂e over the limit, phasing in from 2024.