BuildingCensus
–

E & G Plastics

Manufacturing/Industrial Plant in New York City, NY · 5401 1st Ave · 11220

At a glance

E & G Plastics is a 29,500-square-foot manufacturing/industrial plant at 5401 1st Ave in New York City, New York, built in 1913. In its 2024 New York City benchmarking disclosure it reported a site energy-use intensity of 428.6 kBtu/ft² and 1,445 tCO₂e of greenhouse-gas emissions.

ENERGY STAR score
—
not reported · 2024
Site EUI
428.6
kBtu/ft²
GHG emissions
1,445
tCO₂e
GHG intensity
49.0
kgCO₂e/ft²
Floor area
29,500
sq ft
Year built
1913
vintage
◆ Loading map…
85–10070–8455–691–54
This entry + 6 nearby

Local Law 84 (LL84) · reporting year 2024

Benchmarking record

FieldValue
ENERGY STAR score—
Site EUI428.6 kBtu/ft²
Source EUI1190.6 kBtu/ft²
GHG emissions1,445 tCO₂e
GHG intensity49.0 kgCO₂e/ft²
Electricity3,658,866 kWh
Natural gas1,589 therms
Water use1,363 kgal
Gross floor area29,500 sq ft
Source recordnyc:6118570:2024

The disclosure history

Year over year

YearScoreΔSite EUIGHG emissions
2024latest—428.6 kBtu/ft²1,445 tCO₂e
2023—581.8 kBtu/ft²1,854 tCO₂e
2022—344.7 kBtu/ft²848 tCO₂e

Compliance context

Local Law 84 (LL84)

Under Local Law 97, buildings over 25,000 sq ft face carbon caps with fines of $268 per metric ton of CO₂e over the limit, phasing in from 2024.

Program details →

Ownership

No owning organisation shown. Names of private individuals in the disclosure are not published here.

Own or manage this building? Claim it to correct the record and get compliance alerts.

Location

Address
5401 1st Ave
State
New York
ZIP
11220
Coordinates
40.64809, -74.02154

Within ~1 km

Nearby benchmarked buildings

See also: most efficient in New York City · biggest emitters

How does E & G Plastics compare with other manufacturing/industrial plant buildings in New York City?

The latest disclosures cover 592 manufacturing/industrial plant buildings in New York City, out of 48,310 buildings citywide. Its site EUI of 428.6 kBtu/ft² is about 317% above the average of 102.7 kBtu/ft² — it uses more energy per square foot than the typical building in that group. Its emissions intensity of 49.0 kgCO₂e/ft² is about 536% above the group average of 7.7 kgCO₂e/ft².

At 29,500 sq ft, it is about 66% below the average floor area of 87,732 sq ft for those buildings. It was built in 1913, 36 years earlier than the group's average year built (1949). Across all 24 jurisdictions BuildingCensus covers, the 2,372 manufacturing/industrial plant buildings average an ENERGY STAR score of 67 and a site EUI of 126.3 kBtu/ft².

How has E & G Plastics's energy performance changed over time?

BuildingCensus holds 3 New York City disclosures for E & G Plastics, covering report years 2022–2024. Site EUI moved from 344.7 kBtu/ft² (2022) to 428.6 kBtu/ft² (2024), an 24% increase. Reported emissions went from 848 tCO₂e to 1,445 tCO₂e over the same span (up 70%).

What does a site EUI of 428.6 kBtu/ft² mean?

Site energy-use intensity (EUI) is the energy a building uses on site in a year divided by its floor area, in thousand Btu per square foot — lower is more efficient. E & G Plastics's 428.6 kBtu/ft² across 29,500 sq ft works out to about 12.6 billion Btu (3,706 MWh-equivalent) in 2024. Its source EUI of 1190.6 kBtu/ft² also counts the energy lost generating and delivering that power, which is why it is higher. The disclosure also reports 3,658,866 kWh of electricity, 1,589 therms of natural gas and 1,363 thousand gallons of water for the year.

Which law requires E & G Plastics to report its energy use?

E & G Plastics reports under Local Law 84 (LL84), the legal basis of New York City's Energy and Water Data Disclosure program, which publishes each covered building's annual benchmarking results. The record shown here is the report-year 2024 disclosure (source record nyc:6118570:2024). Under Local Law 97, buildings over 25,000 sq ft face carbon caps with fines of $268 per metric ton of CO₂e over the limit, phasing in from 2024.

More manufacturing/industrial plant buildings in New York City

Frequently asked questions

What is E & G Plastics's energy grade?

E & G Plastics did not report an ENERGY STAR score in its 2024 disclosure, but its site energy-use intensity was 428.6 kBtu/ft².

How much energy does E & G Plastics use?

Its 2024 site energy-use intensity was 428.6 kBtu/ft² (1190.6 kBtu/ft² source) across 29,500 sq ft, including 3,658,866 kWh of electricity and 1,589 therms of natural gas.

What are E & G Plastics's carbon emissions?

E & G Plastics reported 1,445 tCO₂e of greenhouse-gas emissions (49.0 kgCO₂e/ft²) for 2024.

Where is E & G Plastics?

E & G Plastics is at 5401 1st Ave, in New York City, New York 11220. Its coordinates are 40.64809, -74.02154 (latitude, longitude), as published in the Energy and Water Data Disclosure file.

How big is E & G Plastics and when was it built?

E & G Plastics has 29,500 sq ft of gross floor area, as reported in its 2024 disclosure. The disclosure lists 1913 as its year built. It is classed as manufacturing/industrial plant.

Is E & G Plastics covered by Local Law 84 (LL84)?

Yes — it appears in the 2024 Energy and Water Data Disclosure disclosure, which lists the buildings reporting under Local Law 84 (LL84).

Working with New York City building benchmarking records? Pro adds alerts, change history and CSV export ($49/mo); Enterprise adds full national files, the API and an MCP server for AI tools.

About this data

Source: Energy and Water Data Disclosure (Local Law 84 (LL84)), as published October 2, 2026. See the methodology for how records are matched, cleaned and scored.

Cite as: BuildingCensus, “E & G Plastics, New York City, New York — 2024 benchmarking disclosure”, https://buildingcensus.com/buildings/new-york-city/e-g-plastics-576980ec (data as of October 2, 2026).