Bronx Point - Phase 1 (2198)

How does Bronx Point - Phase 1 (2198) compare with other multifamily housing buildings in New York City?

The latest disclosures cover 33,022 multifamily housing buildings in New York City, out of 48,310 buildings citywide. Bronx Point - Phase 1 (2198)'s ENERGY STAR score of 85 compares with an average of 63 across the 22,829 that report a score; it scores higher than 70% of them and lower than 29%. Its site EUI of 44.5 kBtu/ft² is about 41% below the average of 74.9 kBtu/ft² — it uses less energy per square foot than the typical building in that group. Its emissions intensity of 3.5 kgCO₂e/ft² is about 33% below the group average of 5.2 kgCO₂e/ft².

At 528,221 sq ft, it is about 423% above the average floor area of 100,951 sq ft for those buildings. It was built in 2023, 71 years later than the group's average year built (1952). Across all 24 jurisdictions BuildingCensus covers, the 59,945 multifamily housing buildings average an ENERGY STAR score of 70 and a site EUI of 59.0 kBtu/ft².

How has Bronx Point - Phase 1 (2198)'s energy performance changed over time?

BuildingCensus holds 2 New York City disclosures for Bronx Point - Phase 1 (2198), covering report years 2023–2024. Site EUI moved from 7.9 kBtu/ft² (2023) to 44.5 kBtu/ft² (2024), an 463% increase. Reported emissions went from 505 tCO₂e to 1,854 tCO₂e over the same span (up 267%).

What does an ENERGY STAR score of 85 mean?

ENERGY STAR scores run from 1 to 100 and are computed by the EPA's Portfolio Manager as a percentile against similar buildings nationwide, adjusted for climate, size and use: a score of 85 means the building performs better than about 85% of its national peers. BuildingCensus bands the score into report-card grades; 85 falls in band A — high performer (85–100). Scores of 75 or higher meet the threshold for ENERGY STAR certification; certification itself is a separate, verified application that the disclosure does not record. In New York City, 43% of scored buildings are at 75 or above.

Site energy-use intensity (EUI) is the energy a building uses on site in a year divided by its floor area, in thousand Btu per square foot — lower is more efficient. Bronx Point - Phase 1 (2198)'s 44.5 kBtu/ft² across 528,221 sq ft works out to about 23.5 billion Btu (6,889 MWh-equivalent) in 2024. Its source EUI of 79.1 kBtu/ft² also counts the energy lost generating and delivering that power, which is why it is higher. The disclosure also reports 2,856,846 kWh of electricity and 137,786 therms of natural gas for the year.

Which law requires Bronx Point - Phase 1 (2198) to report its energy use?

Bronx Point - Phase 1 (2198) reports under Local Law 84 (LL84), the legal basis of New York City's Energy and Water Data Disclosure program, which publishes each covered building's annual benchmarking results. The record shown here is the report-year 2024 disclosure (source record nyc:33918949:2024). Under Local Law 97, buildings over 25,000 sq ft face carbon caps with fines of $268 per metric ton of CO₂e over the limit, phasing in from 2024.