BuildingCensus
–

Irvine: 426 Broome St

Multifamily Housing in New York City, NY · 426 Broome St · 10013

At a glance

Irvine: 426 Broome St is a 33,561-square-foot multifamily housing building in New York City, New York, built in 1900. In its 2024 New York City benchmarking disclosure it reported a site energy-use intensity of 37.7 kBtu/ft² and 116 tCO₂e of greenhouse-gas emissions.

ENERGY STAR score
—
not reported · 2024
Site EUI
37.7
kBtu/ft²
GHG emissions
116
tCO₂e
GHG intensity
3.5
kgCO₂e/ft²
Floor area
33,561
sq ft
Year built
1900
vintage
◆ Loading map…
85–10070–8455–691–54
This entry + 6 nearby

Local Law 84 (LL84) · reporting year 2024

Benchmarking record

FieldValue
ENERGY STAR score—
Site EUI37.7 kBtu/ft²
Source EUI80.4 kBtu/ft²
GHG emissions116 tCO₂e
GHG intensity3.5 kgCO₂e/ft²
Electricity229,515 kWh
Natural gas4,810 therms
Water use916 kgal
Gross floor area33,561 sq ft
Source recordnyc:6282674:2024

The disclosure history

Year over year

YearScoreΔSite EUIGHG emissions
2024latest—37.7 kBtu/ft²116 tCO₂e
2023—35.5 kBtu/ft²106 tCO₂e
2022—37.7 kBtu/ft²92 tCO₂e

Compliance context

Local Law 84 (LL84)

Under Local Law 97, buildings over 25,000 sq ft face carbon caps with fines of $268 per metric ton of CO₂e over the limit, phasing in from 2024.

Program details →

Ownership

No owning organisation shown. Names of private individuals in the disclosure are not published here.

Own or manage this building? Claim it to correct the record and get compliance alerts.

Location

Address
426 Broome St
State
New York
ZIP
10013
Coordinates
40.72130, -73.99873

Within ~1 km

Nearby benchmarked buildings

See also: most efficient in New York City · biggest emitters

How does Irvine: 426 Broome St compare with other multifamily housing buildings in New York City?

The latest disclosures cover 33,022 multifamily housing buildings in New York City, out of 48,310 buildings citywide. Its site EUI of 37.7 kBtu/ft² is about half of the average of 74.9 kBtu/ft² — it uses less energy per square foot than the typical building in that group. Its emissions intensity of 3.5 kgCO₂e/ft² is about 34% below the group average of 5.2 kgCO₂e/ft².

At 33,561 sq ft, it is about 67% below the average floor area of 100,951 sq ft for those buildings. It was built in 1900, 52 years earlier than the group's average year built (1952). Across all 24 jurisdictions BuildingCensus covers, the 59,945 multifamily housing buildings average an ENERGY STAR score of 70 and a site EUI of 59.0 kBtu/ft².

How has Irvine: 426 Broome St's energy performance changed over time?

BuildingCensus holds 3 New York City disclosures for Irvine: 426 Broome St, covering report years 2022–2024. Site EUI moved from 37.7 kBtu/ft² (2022) to 37.7 kBtu/ft² (2024), an 0% increase. Reported emissions went from 92 tCO₂e to 116 tCO₂e over the same span (up 26%).

What does a site EUI of 37.7 kBtu/ft² mean?

Site energy-use intensity (EUI) is the energy a building uses on site in a year divided by its floor area, in thousand Btu per square foot — lower is more efficient. Irvine: 426 Broome St's 37.7 kBtu/ft² across 33,561 sq ft works out to about 1.3 billion Btu (371 MWh-equivalent) in 2024. Its source EUI of 80.4 kBtu/ft² also counts the energy lost generating and delivering that power, which is why it is higher. The disclosure also reports 229,515 kWh of electricity, 4,810 therms of natural gas and 916 thousand gallons of water for the year.

Which law requires Irvine: 426 Broome St to report its energy use?

Irvine: 426 Broome St reports under Local Law 84 (LL84), the legal basis of New York City's Energy and Water Data Disclosure program, which publishes each covered building's annual benchmarking results. The record shown here is the report-year 2024 disclosure (source record nyc:6282674:2024). Under Local Law 97, buildings over 25,000 sq ft face carbon caps with fines of $268 per metric ton of CO₂e over the limit, phasing in from 2024.

More multifamily housing buildings in New York City

Frequently asked questions

What is Irvine: 426 Broome St's energy grade?

Irvine: 426 Broome St did not report an ENERGY STAR score in its 2024 disclosure, but its site energy-use intensity was 37.7 kBtu/ft².

How much energy does Irvine: 426 Broome St use?

Its 2024 site energy-use intensity was 37.7 kBtu/ft² (80.4 kBtu/ft² source) across 33,561 sq ft, including 229,515 kWh of electricity and 4,810 therms of natural gas.

What are Irvine: 426 Broome St's carbon emissions?

Irvine: 426 Broome St reported 116 tCO₂e of greenhouse-gas emissions (3.5 kgCO₂e/ft²) for 2024.

Where is Irvine: 426 Broome St?

Irvine: 426 Broome St is in New York City, New York 10013. Its coordinates are 40.72130, -73.99873 (latitude, longitude), as published in the Energy and Water Data Disclosure file.

How big is Irvine: 426 Broome St and when was it built?

Irvine: 426 Broome St has 33,561 sq ft of gross floor area, as reported in its 2024 disclosure. The disclosure lists 1900 as its year built. It is classed as multifamily housing.

Is Irvine: 426 Broome St covered by Local Law 84 (LL84)?

Yes — it appears in the 2024 Energy and Water Data Disclosure disclosure, which lists the buildings reporting under Local Law 84 (LL84).

Working with New York City building benchmarking records? Pro adds alerts, change history and CSV export ($49/mo); Enterprise adds full national files, the API and an MCP server for AI tools.

About this data

Source: Energy and Water Data Disclosure (Local Law 84 (LL84)), as published October 2, 2026. See the methodology for how records are matched, cleaned and scored.

Cite as: BuildingCensus, “Irvine: 426 Broome St, New York City, New York — 2024 benchmarking disclosure”, https://buildingcensus.com/buildings/new-york-city/irvine-426-broome-st-7a41820b (data as of October 2, 2026).