BuildingCensus
D

MARBLE HILL

Multifamily Housing in New York City, NY · 5210 BROADWAY · 10463

At a glance

MARBLE HILL is a 1,524,105-square-foot multifamily housing building at 5210 BROADWAY in New York City, New York, built in 1952. In its 2024 New York City benchmarking disclosure it reported an ENERGY STAR score of 48 out of 100 (grade D), a site energy-use intensity of 88.4 kBtu/ft² and 9,303 tCO₂e of greenhouse-gas emissions. That score is higher than 30% of the 22,829 scored multifamily housing buildings in New York City.

ENERGY STAR score
48
band D · 2024
Site EUI
88.4
kBtu/ft²
GHG emissions
9,303
tCO₂e
GHG intensity
6.1
kgCO₂e/ft²
Floor area
1,524,105
sq ft
Year built
1952
vintage
◆ Loading map…
85–10070–8455–691–54
This entry + 6 nearby

Local Law 84 (LL84) · reporting year 2024

Benchmarking record

FieldValue
ENERGY STAR score48 (band D)
Site EUI88.4 kBtu/ft²
Source EUI132.6 kBtu/ft²
GHG emissions9,303 tCO₂e
GHG intensity6.1 kgCO₂e/ft²
Electricity10,133,833 kWh
Natural gas1,002,243 therms
Gross floor area1,524,105 sq ft
Source recordnyc:2831107:2024

The disclosure history

Year over year

YearScoreΔSite EUIGHG emissions
2024latest48+3288.4 kBtu/ft²9,303 tCO₂e
202316-84118.4 kBtu/ft²11,972 tCO₂e
202210013.1 kBtu/ft²1,487 tCO₂e

Compliance context

Local Law 84 (LL84)

Under Local Law 97, buildings over 25,000 sq ft face carbon caps with fines of $268 per metric ton of CO₂e over the limit, phasing in from 2024.

Program details →

Ownership

No owning organisation shown. Names of private individuals in the disclosure are not published here.

Own or manage this building? Claim it to correct the record and get compliance alerts.

Location

Address
5210 BROADWAY
State
New York
ZIP
10463
Coordinates
40.87493, -73.90935

Within ~1 km

Nearby benchmarked buildings

See also: most efficient in New York City · biggest emitters

How does MARBLE HILL compare with other multifamily housing buildings in New York City?

The latest disclosures cover 33,022 multifamily housing buildings in New York City, out of 48,310 buildings citywide. MARBLE HILL's ENERGY STAR score of 48 compares with an average of 63 across the 22,829 that report a score; it scores higher than 30% of them and lower than 69%. Its site EUI of 88.4 kBtu/ft² is about 18% above the average of 74.9 kBtu/ft² — it uses more energy per square foot than the typical building in that group. Its emissions intensity of 6.1 kgCO₂e/ft² is about 17% above the group average of 5.2 kgCO₂e/ft².

At 1,524,105 sq ft, it is about 1410% above the average floor area of 100,951 sq ft for those buildings. Its 1952 construction date is close to the group's average year built (1952). Across all 24 jurisdictions BuildingCensus covers, the 59,945 multifamily housing buildings average an ENERGY STAR score of 70 and a site EUI of 59.0 kBtu/ft².

How has MARBLE HILL's energy performance changed over time?

BuildingCensus holds 3 New York City disclosures for MARBLE HILL, covering report years 2022–2024. Its ENERGY STAR score went from 100 in 2022 to 48 in 2024 (-52 points); its best year on file was 2022, at 100. Site EUI moved from 13.1 kBtu/ft² (2022) to 88.4 kBtu/ft² (2024), an 575% increase. Reported emissions went from 1,487 tCO₂e to 9,303 tCO₂e over the same span (up 526%).

What does an ENERGY STAR score of 48 mean?

ENERGY STAR scores run from 1 to 100 and are computed by the EPA's Portfolio Manager as a percentile against similar buildings nationwide, adjusted for climate, size and use: a score of 48 means the building performs better than about 48% of its national peers. BuildingCensus bands the score into report-card grades; 48 falls in band D — lowest band (1–54). It sits 27 points below 75, the threshold for ENERGY STAR certification. In New York City, 43% of scored buildings are at 75 or above.

Site energy-use intensity (EUI) is the energy a building uses on site in a year divided by its floor area, in thousand Btu per square foot — lower is more efficient. MARBLE HILL's 88.4 kBtu/ft² across 1,524,105 sq ft works out to about 134.7 billion Btu (39,486 MWh-equivalent) in 2024. Its source EUI of 132.6 kBtu/ft² also counts the energy lost generating and delivering that power, which is why it is higher. The disclosure also reports 10,133,833 kWh of electricity and 1,002,243 therms of natural gas for the year.

Which law requires MARBLE HILL to report its energy use?

MARBLE HILL reports under Local Law 84 (LL84), the legal basis of New York City's Energy and Water Data Disclosure program, which publishes each covered building's annual benchmarking results. The record shown here is the report-year 2024 disclosure (source record nyc:2831107:2024). Under Local Law 97, buildings over 25,000 sq ft face carbon caps with fines of $268 per metric ton of CO₂e over the limit, phasing in from 2024.

More multifamily housing buildings in New York City

Frequently asked questions

What is MARBLE HILL's energy grade?

MARBLE HILL scores 48 out of 100 on ENERGY STAR — band D, lowest band (1–54) — in its 2024 New York City disclosure. Scores are national percentiles against similar buildings; 75+ qualifies for ENERGY STAR certification.

How much energy does MARBLE HILL use?

Its 2024 site energy-use intensity was 88.4 kBtu/ft² (132.6 kBtu/ft² source) across 1,524,105 sq ft, including 10,133,833 kWh of electricity and 1,002,243 therms of natural gas.

What are MARBLE HILL's carbon emissions?

MARBLE HILL reported 9,303 tCO₂e of greenhouse-gas emissions (6.1 kgCO₂e/ft²) for 2024.

Where is MARBLE HILL?

MARBLE HILL is at 5210 BROADWAY, in New York City, New York 10463. Its coordinates are 40.87493, -73.90935 (latitude, longitude), as published in the Energy and Water Data Disclosure file.

How big is MARBLE HILL and when was it built?

MARBLE HILL has 1,524,105 sq ft of gross floor area, as reported in its 2024 disclosure. The disclosure lists 1952 as its year built. It is classed as multifamily housing.

Is MARBLE HILL covered by Local Law 84 (LL84)?

Yes — it appears in the 2024 Energy and Water Data Disclosure disclosure, which lists the buildings reporting under Local Law 84 (LL84).

Working with New York City building benchmarking records? Pro adds alerts, change history and CSV export ($49/mo); Enterprise adds full national files, the API and an MCP server for AI tools.

About this data

Source: Energy and Water Data Disclosure (Local Law 84 (LL84)), as published October 2, 2026. See the methodology for how records are matched, cleaned and scored.

Cite as: BuildingCensus, “MARBLE HILL, New York City, New York — 2024 benchmarking disclosure”, https://buildingcensus.com/buildings/new-york-city/marble-hill-7ef8a1db (data as of October 2, 2026).